On 03/09/2015 09:09 PM, Laurent Pinchart wrote:
> Hi Hans,
>
> Thank you for the review.
>
> On Wednesday 04 March 2015 16:11:43 Hans Verkuil wrote:
>> Hi Laurent,
>>
>> Almost OK :-)
>
> Great :-)
>
>> Two small issues remain, see below.
>>
>> On 03/04/15 15:51, Laurent Pinchart wrote:
>>> Xilinx platforms have no hardwired video capture or video processing
>>> interface. Users create capture and memory to memory processing
>>> pipelines in the FPGA fabric to suit their particular needs, by
>>> instantiating video IP cores from a large library.
>>>
>>> The Xilinx Video IP core is a framework that models a video pipeline
>>> described in the device tree and expose the pipeline to userspace
>>> through the media controller and V4L2 APIs.
>>>
>>> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>>> Signed-off-by: Hyun Kwon <hyun.kwon@xxxxxxxxxx>
>>> Signed-off-by: Radhey Shyam Pandey <radheys@xxxxxxxxxx>
>>> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
>>>
>>> ---
>>>
>>> Cc: devicetree@xxxxxxxxxxxxxxx
>>>
>>> Changes since v5:
>>>
>>> - Report frame field as V4L2_FIELD_NONE
>>> - Update to the mainline pad-level subdev API changes
>>> - Add VIDIOC_CREATE_BUFS support
>>> - Add a comment to explain the lack of VB2_READ and VB2_WRITE
>>>
>>> Changes since v4:
>>>
>>> - Use a DT format description closer to the hardware
>>> - Document the xvip_device clk field
>>>
>>> Changes since v3:
>>>
>>> - Rename V4L2_MBUS_FMT_* to MEDIA_BUS_FMT_*
>>> - Cleanup unused vdma configuration.
>>> - Add resource init and cleanup helpers
>>> - Return buffers to vb2 when media pipeline start fails
>>>
>>> Changes since v2:
>>>
>>> - Remove explicit trailing \0 after snprintf
>>> - Don't hardcode colorspace
>>>
>>> Changes since v1:
>>>
>>> - Remove unnecessary fields from struct xvip_dma_buffer
>>> - Fix querycap capabilities and bus_info reporting
>>> - Refuse to set format when the queue is busy
>>> - Return buffers to vb2 when start_streaming fails
>>> - Use vb2 fops and ioctl ops
>>>
>>> v1 was made of the following individual patches.
>>>
>>> media: xilinx: vip: Add yuv444 and bayer formats
>>> media: xilinx: vip: Remove _TIMING_ from register definition
>>> media: xilinx: dma: Add vidioc_enum_fmt_vid_cap callback
>>> media: xilinx: dma: Fix alignments of xvip_dma_fops definition
>>> media: xilinx: dma: Workaround for bytesperline
>>> media: xilinx: vip: Add default min/max height/width definitions
>>> media: xilinx: vip: Add common sink/source pad IDs
>>> media: xilinx: vip: Add xvip_set_format_size()
>>> media: xilinx: vip: Add xvip_enum_mbus_code()
>>> media: xilinx: vip: Add xvip_enum_frame_size()
>>> media: xilinx: vip: Add register clear and set functions
>>> media: xilinx: vip: Add xvip_start()
>>> media: xilinx: vip: Add xvip_stop()
>>> media: xilinx: vip: Add xvip_set_frame_size()
>>> media: xilinx: vip: Add enable/disable reg update functions
>>> media: xilinx: vip: Add xvip_print_version()
>>> media: xilinx: vip: Add xvip_reset()
>>> media: xilinx: vip: Add xvip_get_frame_size()
>>> media: xilinx: vip: Add suspend/resume helper functions
>>> media: xilinx: vip: Change the return value of xvip_get_format_by_code()
>>> media: xilinx: vip: Change the return value of xvip_of_get_format()
>>> media: xilinx: vip: Change the return value of xvip_get_format_by_fourcc()
>>> media: xilinx: vipp: Remove of_match_ptr()
>>> media: xilinx: vipp: Add control to inherit subdevice controls
>>> media: xilinx: Make disconnected video nodes return -EPIPE at stream on
>>> media: xilinx: Make links configurable
>>> media: xilinx: Rename xvip_pipeline_entity to xvip_graph_entity
>>> media: xilinx: Rename xvip_pipeline to xvip_composite_device
>>> media: xilinx: Rename xvipp_pipeline_* functions to xvip_graph_*
>>> media: xilinx: Rename xvipp_v4l2_* functions to xvip_composite_v4l2_*
>>> media: xilinx: Rename xvipp_* functions to xvip_composite_*
>>> media: xilinx: Move pipeline management code to xilinx-dma.c
>>> media: xilinx: Add missing mutex_destroy call
>>> media: xilinx: Create xvip_pipeline structure
>>> media: xilinx: Support more than two VDMAs in DT
>>> media: xilinx: dma: Change vdma configuration to cyclic-mode
>>> Revert "media: xilinx: dma: Workaround for bytesperline"
>>> media: xilinx: Added DMA error handling
>>> media: xilinx: Fix error handling
>>> media: xilinx: Reordered mutexes initialization
>>> media: xilinx: vipp: Add devicetree bindings documentation
>>> media: xilinx: Reordered mutexes initialization
>>> media: xilinx: Set format description in enum_fmt
>>> media: xilinx: Remove global control handler
>>> media: xilinx: dma: Use the interleaved dmaengine API
>>> xilinx: Remove .owner field for drivers
>>> v4l: xilinx: video: Rename compatible string to xlnx,video
>>> v4l: xilinx: Remove axi- prefix from DT properties
>>> v4l: xilinx: dma: Give back queued buffers at streamoff time
>>> ---
>>>
>>> .../devicetree/bindings/media/xilinx/video.txt | 35 +
>>> .../bindings/media/xilinx/xlnx,video.txt | 55 ++
>>> MAINTAINERS | 9 +
>>> drivers/media/platform/Kconfig | 1 +
>>> drivers/media/platform/Makefile | 2 +
>>> drivers/media/platform/xilinx/Kconfig | 10 +
>>> drivers/media/platform/xilinx/Makefile | 3 +
>>> drivers/media/platform/xilinx/xilinx-dma.c | 766 ++++++++++++++++
>>> drivers/media/platform/xilinx/xilinx-dma.h | 109 +++
>>> drivers/media/platform/xilinx/xilinx-vip.c | 311 +++++++++
>>> drivers/media/platform/xilinx/xilinx-vip.h | 238 +++++++
>>> drivers/media/platform/xilinx/xilinx-vipp.c | 669 ++++++++++++++++
>>> drivers/media/platform/xilinx/xilinx-vipp.h | 49 ++
>>> include/dt-bindings/media/xilinx-vip.h | 39 ++
>>> 14 files changed, 2296 insertions(+)
>>> create mode 100644
>>> Documentation/devicetree/bindings/media/xilinx/video.txt
>>> create mode 100644
>>> Documentation/devicetree/bindings/media/xilinx/xlnx,video.txt create
>>> mode 100644 drivers/media/platform/xilinx/Kconfig
>>> create mode 100644 drivers/media/platform/xilinx/Makefile
>>> create mode 100644 drivers/media/platform/xilinx/xilinx-dma.c
>>> create mode 100644 drivers/media/platform/xilinx/xilinx-dma.h
>>> create mode 100644 drivers/media/platform/xilinx/xilinx-vip.c
>>> create mode 100644 drivers/media/platform/xilinx/xilinx-vip.h
>>> create mode 100644 drivers/media/platform/xilinx/xilinx-vipp.c
>>> create mode 100644 drivers/media/platform/xilinx/xilinx-vipp.h
>>> create mode 100644 include/dt-bindings/media/xilinx-vip.h
>>
>> <snip>
>>
>>> diff --git a/drivers/media/platform/xilinx/xilinx-dma.c
>>> b/drivers/media/platform/xilinx/xilinx-dma.c new file mode 100644
>>> index 0000000..10209c2
>>> --- /dev/null
>>> +++ b/drivers/media/platform/xilinx/xilinx-dma.c
>>
>> <snip>
>>
>>> +/* ----------------------------------------------------------------------
>>> + * Subdev operations handlers
>>> + */
>>> +
>>> +/**
>>> + * xvip_enum_mbus_code - Enumerate the media format code
>>> + * @subdev: V4L2 subdevice
>>> + * @cfg: V4L2 subdev pad configuration
>>> + * @code: returning media bus code
>>> + *
>>> + * Enumerate the media bus code of the subdevice. Return the
>>> corresponding
>>> + * pad format code. This function only works for subdevices with fixed
>>> format
>>> + * on all pads. Subdevices with multiple format should have their own
>>> + * function to enumerate mbus codes.
>>> + *
>>> + * Return: 0 if the media bus code is found, or -EINVAL if the format
>>> index
>>> + * is not valid.
>>> + */
>>> +int xvip_enum_mbus_code(struct v4l2_subdev *subdev,
>>> + struct v4l2_subdev_pad_config *cfg,
>>> + struct v4l2_subdev_mbus_code_enum *code)
>>> +{
>>> + struct v4l2_mbus_framefmt *format;
>>> +
>>> + if (code->index)
>>> + return -EINVAL;
>>> +
>>
>> You need to handle the case where code->which == ACTIVE (in which case
>> cfg can be NULL).
>
> Indeed. And I don't have access to the necessary information in this function
> to do so.
>
> Would it be fine for you if I return an error when code->which == ACTIVE for
> now ?
That's OK. But please add a comment why you return -EINVAL.
With that change:
Acked-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
