There are 2 mux-controller nodes in J721S2 which are responsible for transferring can signals to the can phy but same node names for both the mux-controllers led to errors while setting up both mux-controllers for can phys simultaneously. Thus, update node names for these mux-controller. Fixes: 98f3b667e1de ("arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain") Signed-off-by: Bhavya Kapoor <b-kapoor@xxxxxx> --- arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi index 82aacc01e8fe..36136db26a47 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi @@ -134,13 +134,13 @@ rtos_ipc_memory_region: ipc-memories@a8000000 { }; }; - mux0: mux-controller { + mux0: mux-controller-0 { compatible = "gpio-mux"; #mux-state-cells = <1>; mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>; }; - mux1: mux-controller { + mux1: mux-controller-1 { compatible = "gpio-mux"; #mux-state-cells = <1>; mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>; -- 2.34.1