Hi Rob Herring, On 26/07/24 6:51 pm, Rob Herring (Arm) wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > On Fri, 26 Jul 2024 18:09:07 +0530, Parthiban Veerasooran wrote: >> The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet >> PHY to enable 10BASE-T1S networks. The Ethernet Media Access Controller >> (MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible >> with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver >> integrated into the LAN8650/1. The communication between the Host and the >> MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial >> Interface (TC6). >> >> Reviewed-by: Conor Dooley<conor.dooley@xxxxxxxxxxxxx> >> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@xxxxxxxxxxxxx> >> --- >> .../bindings/net/microchip,lan8650.yaml | 80 +++++++++++++++++++ >> MAINTAINERS | 1 + >> 2 files changed, 81 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/net/microchip,lan8650.yaml >> > > My bot found errors running 'make dt_binding_check' on your patch: > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/microchip,lan8650.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename > $id: http://devicetree.org/schemas/net/microchip,lan865x.yaml > file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/microchip,lan8650.yaml > Sorry, somehow I missed it. Thanks for letting me know. Will fix it while reposting the patch series as the windows is closed now. Best regards, Parthiban V > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240726123907.566348-15-Parthiban.Veerasooran@xxxxxxxxxxxxx > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. >