On Wed, Mar 4, 2015 at 8:14 AM, Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx> wrote: > Add a documentation of LED Flash class specific sysfs attributes. > Thanks, merged! -Bryan > Signed-off-by: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx> > Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> > Cc: Bryan Wu <cooloney@xxxxxxxxx> > Cc: Richard Purdie <rpurdie@xxxxxxxxx> > --- > Documentation/ABI/testing/sysfs-class-led-flash | 80 +++++++++++++++++++++++ > 1 file changed, 80 insertions(+) > create mode 100644 Documentation/ABI/testing/sysfs-class-led-flash > > diff --git a/Documentation/ABI/testing/sysfs-class-led-flash b/Documentation/ABI/testing/sysfs-class-led-flash > new file mode 100644 > index 0000000..220a027 > --- /dev/null > +++ b/Documentation/ABI/testing/sysfs-class-led-flash > @@ -0,0 +1,80 @@ > +What: /sys/class/leds/<led>/flash_brightness > +Date: March 2015 > +KernelVersion: 4.0 > +Contact: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx> > +Description: read/write > + Set the brightness of this LED in the flash strobe mode, in > + microamperes. The file is created only for the flash LED devices > + that support setting flash brightness. > + > + The value is between 0 and > + /sys/class/leds/<led>/max_flash_brightness. > + > +What: /sys/class/leds/<led>/max_flash_brightness > +Date: March 2015 > +KernelVersion: 4.0 > +Contact: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx> > +Description: read only > + Maximum brightness level for this LED in the flash strobe mode, > + in microamperes. > + > +What: /sys/class/leds/<led>/flash_timeout > +Date: March 2015 > +KernelVersion: 4.0 > +Contact: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx> > +Description: read/write > + Hardware timeout for flash, in microseconds. The flash strobe > + is stopped after this period of time has passed from the start > + of the strobe. The file is created only for the flash LED > + devices that support setting flash timeout. > + > +What: /sys/class/leds/<led>/max_flash_timeout > +Date: March 2015 > +KernelVersion: 4.0 > +Contact: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx> > +Description: read only > + Maximum flash timeout for this LED, in microseconds. > + > +What: /sys/class/leds/<led>/flash_strobe > +Date: March 2015 > +KernelVersion: 4.0 > +Contact: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx> > +Description: read/write > + Flash strobe state. When written with 1 it triggers flash strobe > + and when written with 0 it turns the flash off. > + > + On read 1 means that flash is currently strobing and 0 means > + that flash is off. > + > +What: /sys/class/leds/<led>/flash_fault > +Date: March 2015 > +KernelVersion: 4.0 > +Contact: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx> > +Description: read only > + Space separated list of flash faults that may have occurred. > + Flash faults are re-read after strobing the flash. Possible > + flash faults: > + > + * led-over-voltage - flash controller voltage to the flash LED > + has exceeded the limit specific to the flash controller > + * flash-timeout-exceeded - the flash strobe was still on when > + the timeout set by the user has expired; not all flash > + controllers may set this in all such conditions > + * controller-over-temperature - the flash controller has > + overheated > + * controller-short-circuit - the short circuit protection > + of the flash controller has been triggered > + * led-power-supply-over-current - current in the LED power > + supply has exceeded the limit specific to the flash > + controller > + * indicator-led-fault - the flash controller has detected > + a short or open circuit condition on the indicator LED > + * led-under-voltage - flash controller voltage to the flash > + LED has been below the minimum limit specific to > + the flash > + * controller-under-voltage - the input voltage of the flash > + controller is below the limit under which strobing the > + flash at full current will not be possible; > + the condition persists until this flag is no longer set > + * led-over-temperature - the temperature of the LED has exceeded > + its allowed upper limit > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
