Conor Dooley wrote:
> There is no rohm,dh2228fv on any of supported JH7110 boards - in fact
> the dh2228fv almost certainly does not exist as it is not a valid Rohm
> part number. Likely a typo by Maxime when adding the device originally,
> and should have been bh2228fv, but these boards do not have a bh2228fv
> either! Remove it from jh7110-common.dtsi - pretending to have a device
> so that the spidev driver will be bound by Linux is not acceptable.
Hi Conor,
This patch is correct, but as you mention the fake device was most likely added
in order to use spidev from userspace with random devices added on the exposed
pins. In case someone actually makes use of this wouldn't this be a regression?
What is the right way to support this?
/Emil
>
> Fixes: 74fb20c8f05d ("riscv: dts: starfive: Add spi node and pins configuration")
> Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
> CC: Emil Renner Berthing <kernel@xxxxxxxx>
> CC: Conor Dooley <conor@xxxxxxxxxx>
> CC: Rob Herring <robh@xxxxxxxxxx>
> CC: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
> CC: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
> CC: Palmer Dabbelt <palmer@xxxxxxxxxxx>
> CC: Albert Ou <aou@xxxxxxxxxxxxxxxxx>
> CC: William Qiu <william.qiu@xxxxxxxxxxxxxxxx>
> CC: linux-riscv@xxxxxxxxxxxxxxxxxxx
> CC: devicetree@xxxxxxxxxxxxxxx
> CC: linux-kernel@xxxxxxxxxxxxxxx
> ---
> arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 6 ------
> 1 file changed, 6 deletions(-)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> index 8ff6ea64f048..395436ec0f97 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> @@ -346,12 +346,6 @@ &spi0 {
> pinctrl-names = "default";
> pinctrl-0 = <&spi0_pins>;
> status = "okay";
> -
> - spi_dev0: spi@0 {
> - compatible = "rohm,dh2228fv";
> - reg = <0>;
> - spi-max-frequency = <10000000>;
> - };
> };
>
> &sysgpio {
> --
> 2.43.2
>
