On 25/07/2024 14:47, wangshuaijie@xxxxxxxxxx wrote: > >>> + $ref: /schemas/types.yaml#/definitions/uint32 >>> + description: >>> + Set the number of the SAR(Specific Absorption Rate) sensor. >>> + It is set to 0 if one awinic sar chip is used. >>> + If two awinic sar chips are used, awinic,sar-label in the first >>> + awinic-sar should be set to 0 and awinic,sar-label in the second >>> + awinic-sar should be set to 1. >>> + In an application where a device utilizes multiple proximity sensors, >>> + it is used to retrieve the names of the register configuration files >>> + that the drivers need to load. For example: aw963xx_reg_0.bin/aw963xx_reg_1.bin >>> + >>> + awinic,regulator-power-supply: >> >> It does not look like you tested the bindings, at least after quick >> look. Please run `make dt_binding_check` (see >> Documentation/devicetree/bindings/writing-schema.rst for instructions). >> Maybe you need to update your dtschema and yamllint. >> > > The patch for v4 will fix these issues. Really? I commented here that you did not test it, so let's look at v4 and see if you tested it. Best regards, Krzysztof
