On Wed, Jul 24, 2024 at 08:27:03AM +0200, Krzysztof Kozlowski wrote: > On 23/07/2024 11:03, Varadarajan Narayanan wrote: > > USB uses icc-clk framework to enable the NoC interface clock. > > Hence the 'iface' clock is removed from the list of clocks. > > Update the clock-names list accordingly. > > But the clock is still there and is still used by this block. This looks > like adjusting hardware per Linux implementation. > > Why suddenly this clock was removed from this hardware? This clock per se is not used by the USB block. It is needed to enable the path for CPU to reach the USB block (and vice versa). Hence, we were adviced to use the ICC framework to enable this clock and not the clocks/clock-names DT entries. Please refer to [1] where similar clocks for IPQ9574 were NAK'ed. [1] https://lore.kernel.org/linux-arm-msm/CAA8EJppabK8j9T40waMv=t-1aksXfqJibWuS41GhruzLhpatrg@xxxxxxxxxxxxxx/ > > Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx> > > --- > > .../devicetree/bindings/usb/qcom,dwc3.yaml | 17 ++++++++++++++++- > > 1 file changed, 16 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml > > index efde47a5b145..6c5f962bbcf9 100644 > > --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml > > +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml > > @@ -220,6 +220,22 @@ allOf: > > - const: sleep > > - const: mock_utmi > > > > + - if: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - qcom,ipq5332-dwc3 > > + then: > > + properties: > > + clocks: > > + maxItems: 3 > > + clock-names: > > + items: > > + - const: core > > + - const: sleep > > + - const: mock_utmi > > So this is the same as first case. Just put it there. It's your task to > check if you are duplicating a case, not reviewer's... Will fix that. Thanks Varada
