i.MX8qxp Display Controller contains a AXI performance counter which allows measurement of average bandwidth and latency during operation. Signed-off-by: Liu Ying <victor.liu@xxxxxxx> --- v3: * New patch. (Rob) ...sl,imx8qxp-dc-axi-performance-counter.yaml | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml new file mode 100644 index 000000000000..1d6501afc7f2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller AXI Performance Counter + +description: | + Performance counters are provided to allow measurement of average bandwidth + and latency during operation. The following features are supported: + + * Manual and timer controlled measurement mode. + + * Measurement counters: + - GLOBAL_COUNTER for overall measurement time + - BUSY_COUNTER for number of data bus busy cycles + - DATA_COUNTER for number of data transfer cycles + - TRANSFER_COUNTER for number of transfers + - ADDRBUSY_COUNTER for number of address bus busy cycles + - LATENCY_COUNTER for average latency + + * Counter overflow detection. + + * Outstanding Transfer Counters (OTC) which are used for latency measurement + have to run immediately after reset, but can be disabled by software when + there is no need for latency measurement. + +maintainers: + - Liu Ying <victor.liu@xxxxxxx> + +properties: + compatible: + const: fsl,imx8qxp-dc-axi-performance-counter + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + + pmu@5618f000 { + compatible = "fsl,imx8qxp-dc-axi-performance-counter"; + reg = <0x5618f000 0x90>; + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; + }; -- 2.34.1
