Wrap existing pwrkey node inside a pon node, to conform to dt schema.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/pma8084.dtsi | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi
index 2985f4805b93..06e9193b87bc 100644
--- a/arch/arm/boot/dts/qcom/pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom/pma8084.dtsi
@@ -19,12 +19,17 @@ rtc@6000 {
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
- pwrkey@800 {
- compatible = "qcom,pm8941-pwrkey";
+ pon@800 {
+ compatible = "qcom,pm8941-pon";
reg = <0x800>;
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
};
pma8084_gpios: gpio@c000 {
--
2.45.2
