On Fri, 19 Jul 2024 15:17:15 +0200, Johan Hovold wrote:
> This series fixes some issues with the current x1e80100 PCIe support,
> adds the PCIe5 nodes and enables the modem on the CRD.
>
> The fixes should go into 6.11, but the modem support depends on them so
> I decided to send everything in one series.
>
> Johan
>
>
> Johan Hovold (7):
> arm64: dts: qcom: x1e80100-crd: fix PCIe4 PHY supply
> arm64: dts: qcom: x1e80100: fix PCIe domain numbers
> arm64: dts: qcom: x1e80100-crd: fix up PCIe6a pinctrl node
> arm64: dts: qcom: x1e80100-crd: disable PCIe6A perst pull down
> arm64: dts: qcom: x1e80100-crd: fix missing PCIe4 gpios
> arm64: dts: qcom: x1e80100: add PCIe5 nodes
> arm64: dts: qcom: x1e80100-crd: enable SDX65 modem
>
> arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 110 +++++++++++++++++--
> arch/arm64/boot/dts/qcom/x1e80100.dtsi | 125 +++++++++++++++++++++-
> 2 files changed, 224 insertions(+), 11 deletions(-)
>
> --
> 2.44.2
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y qcom/x1e80100-crd.dtb' for 20240719131722.8343-1-johan+linaro@xxxxxxxxxx:
arch/arm64/boot/dts/qcom/x1e80100-crd.dtb: pci@1c00000: Unevaluated properties are not allowed ('vddpe-3v3-supply' was unexpected)
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
