On Mon, 22 Jul 2024 11:41:19 +0200, ysionneau@xxxxxxxxxxxxx wrote: > From: Yann Sionneau <ysionneau@xxxxxxxxxxxxx> > > Add binding for Kalray Coolidge DSU (Debug System Unit) clock. > > Signed-off-by: Yann Sionneau <ysionneau@xxxxxxxxxxxxx> > --- > > Notes: > > V2 -> V3: New patch > --- > .../clock/kalray,coolidge-dsu-clock.yaml | 39 +++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/kalray,coolidge-dsu-clock.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/kalray,coolidge-dsu-clock.example.dtb: dsu_clock@a44180: reg: [[0, 10764672], [0, 8]] is too long from schema $id: http://devicetree.org/schemas/clock/kalray,coolidge-dsu-clock.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240722094226.21602-9-ysionneau@xxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
