Hello Ishikawa-san, Thank you for the patch. On Tue, Jul 09, 2024 at 09:08:43AM +0900, Yuji Ishikawa wrote: > Adds the Device Tree binding documentation that allows to describe > the Video Input Interface found in Toshiba Visconti SoCs. > > Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@xxxxxxxxxxxxx> > Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > --- > Changelog v2: > - no change > > Changelog v3: > - no change > > Changelog v4: > - fix style problems at the v3 patch > - remove "index" member > - update example > > Changelog v5: > - no change > > Changelog v6: > - add register definition of BUS-IF and MPU > > Changelog v7: > - remove trailing "bindings" from commit header message > - remove trailing "Device Tree Bindings" from title > - fix text wrapping of description > - change compatible to visconti5-viif > - explicitly define allowed properties for port::endpoint > > Changelog v8: > - Suggestion from Krzysztof Kozlowski > - rename bindings description file > - use block style array instead of inline style > - remove clock-lane (as it is fixed at position 0) > - update sample node's name > - use lowercase hex for literals > - Suggestion from Laurent Pinchart > - update description message port::description > - remove port::endpoint::bus-type as it is fixed to <4> > - remove port::endpoint::clock-lanes from example > - add port::endpoint::data-lanes to required parameters list > - fix sequence of data-lanes: <1 2 3 4> because current driver does not support data reordering > - update port::endpoint::data-lanes::description > - remove redundant type definition for port::endpoint::data-lanes > > Changelog v9: > - place "required" after "properties" > - dictionary ordering of properties > > Changelog v10: > - no change > > Changelog v11: > - no change > > .../media/toshiba,visconti5-viif.yaml | 105 ++++++++++++++++++ > 1 file changed, 105 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/toshiba,visconti5-viif.yaml > > diff --git a/Documentation/devicetree/bindings/media/toshiba,visconti5-viif.yaml b/Documentation/devicetree/bindings/media/toshiba,visconti5-viif.yaml > new file mode 100644 > index 0000000000..97e8bda427 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/toshiba,visconti5-viif.yaml > @@ -0,0 +1,105 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/toshiba,visconti5-viif.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Toshiba Visconti5 SoC Video Input Interface > + > +maintainers: > + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx> > + > +description: |- > + Toshiba Visconti5 SoC Video Input Interface (VIIF) receives MIPI CSI2 video > + stream, processes the stream with image signal processors (L1ISP, L2ISP), > + then stores pictures to main memory. > + > +properties: > + compatible: > + const: toshiba,visconti5-viif > + > + reg: > + items: > + - description: Registers for capture control > + - description: Registers for CSI2 receiver control > + - description: Registers for bus interface unit control > + - description: Registers for Memory Protection Unit Is this part of the VIIF, or some sort of more standalone IOMMU ? In the latter case, should it be handled by a separate driver ? > + > + interrupts: > + items: > + - description: Sync Interrupt > + - description: Status (Error) Interrupt > + - description: CSI2 Receiver Interrupt > + - description: L1ISP Interrupt > + > + port: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: CSI-2 input port, with a single endpoint connected to the CSI-2 transmitter. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + additionalProperties: false > + > + properties: > + data-lanes: > + description: VIIF supports 1, 2, 3 or 4 data lanes > + minItems: 1 > + items: > + - const: 1 > + - const: 2 > + - const: 3 > + - const: 4 > + > + clock-noncontinuous: true > + link-frequencies: true > + remote-endpoint: true > + > + required: > + - clock-noncontinuous Does the hardware support the non-continuous clock mode only, or is it configurable ? This is a boolean property, so if both mode are supported, the property should not be required. > + - data-lanes > + - link-frequencies > + - remote-endpoint > + > +required: > + - compatible > + - reg > + - interrupts > + - port > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + video@1c000000 { > + compatible = "toshiba,visconti5-viif"; > + reg = <0 0x1c000000 0 0x6000>, > + <0 0x1c008000 0 0x400>, > + <0 0x1c00e000 0 0x1000>, > + <0 0x2417a000 0 0x1000>; > + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; > + > + port { > + #address-cells = <1>; > + #size-cells = <0>; > + > + csi_in0: endpoint { > + clock-noncontinuous; > + data-lanes = <1 2>; > + link-frequencies = /bits/ 64 <456000000>; > + remote-endpoint = <&imx219_out0>; > + }; > + }; > + }; > + }; -- Regards, Laurent Pinchart
