Wrap existing pwrkey node inside a pon node, to conform to dt schema. Signed-off-by: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx> --- arch/arm/boot/dts/qcom/pma8084.dtsi | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/qcom/pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi index 2985f4805b93..dbf7afcbfd8b 100644 --- a/arch/arm/boot/dts/qcom/pma8084.dtsi +++ b/arch/arm/boot/dts/qcom/pma8084.dtsi @@ -19,12 +19,16 @@ rtc@6000 { interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pwrkey@800 { - compatible = "qcom,pm8941-pwrkey"; + pon@800 { + compatible = "qcom,pm8941-pon"; reg = <0x800>; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; }; pma8084_gpios: gpio@c000 { -- 2.45.2