Add pinctrl node and related pin configuration for CV1800B SoC. Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxxxx> --- .../boot/dts/sophgo/cv1800b-milkv-duo.dts | 49 +++++++++++++++++++ arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 10 ++++ 2 files changed, 59 insertions(+) diff --git a/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts b/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts index 375ff2661b6e..9feb520eaec4 100644 --- a/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts +++ b/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts @@ -39,7 +39,54 @@ &osc { clock-frequency = <25000000>; }; +&pinctrl { + uart0_cfg: uart0-cfg { + uart0-pins { + pinmux = <PINMUX(PIN_UART0_TX, 0)>, + <PINMUX(PIN_UART0_RX, 0)>; + bias-pull-up; + drive-strength-microamp = <10800>; + power-source = <3300>; + }; + }; + + sdhci0_cfg: sdhci0-cfg { + sdhci0-clk-pins { + pinmux = <PINMUX(PIN_SD0_CLK, 0)>; + bias-pull-up; + drive-strength-microamp = <16100>; + power-source = <3300>; + }; + + sdhci0-cmd-pins { + pinmux = <PINMUX(PIN_SD0_CMD, 0)>; + bias-pull-up; + drive-strength-microamp = <10800>; + power-source = <3300>; + }; + + sdhci0-data-pins { + pinmux = <PINMUX(PIN_SD0_D0, 0)>, + <PINMUX(PIN_SD0_D1, 0)>, + <PINMUX(PIN_SD0_D2, 0)>, + <PINMUX(PIN_SD0_D3, 0)>; + bias-pull-up; + drive-strength-microamp = <10800>; + power-source = <3300>; + }; + + sdhci0-cd-pins { + pinmux = <PINMUX(PIN_SD0_CD, 0)>; + bias-pull-up; + drive-strength-microamp = <10800>; + power-source = <3300>; + }; + }; +}; + &sdhci0 { + pinctrl-0 = <&sdhci0_cfg>; + pinctrl-names = "default"; status = "okay"; bus-width = <4>; no-1-8-v; @@ -49,5 +96,7 @@ &sdhci0 { }; &uart0 { + pinctrl-0 = <&uart0_cfg>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi index ec9530972ae2..6a958b822097 100644 --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi @@ -3,6 +3,7 @@ * Copyright (C) 2023 Jisheng Zhang <jszhang@xxxxxxxxxx> */ +#include <dt-bindings/pinctrl/pinctrl-cv1800b.h> #include "cv18xx.dtsi" / { @@ -12,6 +13,15 @@ memory@80000000 { device_type = "memory"; reg = <0x80000000 0x4000000>; }; + + soc { + pinctrl: pinctrl@3008000 { + compatible = "sophgo,cv1800b-pinctrl"; + reg = <0x03001000 0x1000>, + <0x05027000 0x1000>; + reg-names = "sys", "rtc"; + }; + }; }; &plic { -- 2.45.2