Convert txt bindings of TI's DaVinci/Keystone Watchdog Timer Controller to dtschema to allow for validation. Signed-off-by: Kousik Sanagavarapu <five231003@xxxxxxxxx> --- This patch was submitted to the lists before by Nik https://lore.kernel.org/linux-devicetree/20231024195839.49607-1-n2h9z4@xxxxxxxxx/ Although it seems that the right way include the "power-domians" property was not decided upon (read through the thread). I grepped for instances of "power-domains" in ti related SoCs and other subsystems and it seems that there is always only 1 such "power-domains" phandle Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml The existing dts code also confirms this arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi Again, I guess it would be great if someone could point out if this is right - so RFC. Also, shouldn't "clocks" be "required"? - RFC. .../bindings/watchdog/davinci-wdt.txt | 24 --------- .../bindings/watchdog/ti,davinci-wdt.yaml | 52 +++++++++++++++++++ 2 files changed, 52 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/watchdog/davinci-wdt.txt create mode 100644 Documentation/devicetree/bindings/watchdog/ti,davinci-wdt.yaml diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt deleted file mode 100644 index aa10b8ec36e2..000000000000 --- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt +++ /dev/null @@ -1,24 +0,0 @@ -Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller - -Required properties: -- compatible : Should be "ti,davinci-wdt", "ti,keystone-wdt" -- reg : Should contain WDT registers location and length - -Optional properties: -- timeout-sec : Contains the watchdog timeout in seconds -- clocks : the clock feeding the watchdog timer. - Needed if platform uses clocks. - See clock-bindings.txt - -Documentation: -Davinci DM646x - https://www.ti.com/lit/ug/spruer5b/spruer5b.pdf -Keystone - https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf - -Examples: - -wdt: wdt@2320000 { - compatible = "ti,davinci-wdt"; - reg = <0x02320000 0x80>; - timeout-sec = <30>; - clocks = <&clkwdtimer0>; -}; diff --git a/Documentation/devicetree/bindings/watchdog/ti,davinci-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,davinci-wdt.yaml new file mode 100644 index 000000000000..1829c407147d --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/ti,davinci-wdt.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/ti,davinci-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI DaVinci/Keystone Watchdog Timer Controller + +maintainers: + - Kousik Sanagavarapu <five231003@xxxxxxxxx> + +description: | + TI's Watchdog Timer Controller for DaVinci and Keystone Processors. + + Datasheets + + Davinci DM646x - https://www.ti.com/lit/ug/spruer5b/spruer5b.pdf + Keystone - https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - ti,davinci-wdt + - ti,keystone-wdt + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + watchdog@22f0080 { + compatible = "ti,davinci-wdt"; + reg = <0x022f0080 0x80>; + clocks = <&clkwdtimer0>; + }; + +... -- 2.45.2.827.g557ae147e6.dirty
