Add boot-gpios which is required for enabling bootloader backdoor for
flashing firmware to cc1352p7.
Also fix the incorrect reset-gpio.
Signed-off-by: Ayush Singh <ayush@xxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 70de288d728e..6c9d1dc26379 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -888,7 +888,8 @@ &main_uart6 {
mcu {
compatible = "ti,cc1352p7";
- reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>;
+ boot-gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&main_gpio0 14 GPIO_ACTIVE_HIGH>;
vdds-supply = <&vdd_3v3>;
};
};
--
2.45.2
