From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
Add support for the mmc controller of Sophgo SG2042.
SG2042 uses Synopsys PHY the same as TH1520 so we reuse the tuning
logic from TH1520. Besides this, this patch implement some SG2042
specific work, such as clocks and reset ops.
Signed-off-by: Chen Wang <unicorn_wang@xxxxxxxxxxx>
---
drivers/mmc/host/sdhci-of-dwcmshc.c | 130 ++++++++++++++++++++++++++--
1 file changed, 123 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index 972d03ec60e3..d963b8986182 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -113,12 +113,15 @@
#define DWC_MSHC_PTR_PHY_R 0x300
/* PHY general configuration */
-#define PHY_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x00)
-#define PHY_CNFG_RSTN_DEASSERT 0x1 /* Deassert PHY reset */
-#define PHY_CNFG_PAD_SP_MASK GENMASK(19, 16) /* bits [19:16] */
-#define PHY_CNFG_PAD_SP 0x0c /* PMOS TX drive strength */
-#define PHY_CNFG_PAD_SN_MASK GENMASK(23, 20) /* bits [23:20] */
-#define PHY_CNFG_PAD_SN 0x0c /* NMOS TX drive strength */
+#define PHY_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x00)
+#define PHY_CNFG_RSTN_DEASSERT 0x1 /* Deassert PHY reset */
+#define PHY_CNFG_PHY_PWRGOOD_MASK BIT_MASK(1) /* bit [1] */
+#define PHY_CNFG_PAD_SP_MASK GENMASK(19, 16) /* bits [19:16] */
+#define PHY_CNFG_PAD_SP 0x0c /* PMOS TX drive strength */
+#define PHY_CNFG_PAD_SP_SG2042 0x09 /* PMOS TX drive strength for SG2042 */
+#define PHY_CNFG_PAD_SN_MASK GENMASK(23, 20) /* bits [23:20] */
+#define PHY_CNFG_PAD_SN 0x0c /* NMOS TX drive strength */
+#define PHY_CNFG_PAD_SN_SG2042 0x08 /* NMOS TX drive strength for SG2042 */
/* PHY command/response pad settings */
#define PHY_CMDPAD_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x04)
@@ -147,10 +150,12 @@
#define PHY_PAD_TXSLEW_CTRL_P 0x3 /* Slew control for P-Type pad TX */
#define PHY_PAD_TXSLEW_CTRL_N_MASK GENMASK(12, 9) /* bits [12:9] */
#define PHY_PAD_TXSLEW_CTRL_N 0x3 /* Slew control for N-Type pad TX */
+#define PHY_PAD_TXSLEW_CTRL_N_SG2042 0x2 /* Slew control for N-Type pad TX for SG2042 */
/* PHY CLK delay line settings */
#define PHY_SDCLKDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x1d)
-#define PHY_SDCLKDL_CNFG_UPDATE BIT(4) /* set before writing to SDCLKDL_DC */
+#define PHY_SDCLKDL_CNFG_EXTDLY_EN BIT(0)
+#define PHY_SDCLKDL_CNFG_UPDATE BIT(4) /* set before writing to SDCLKDL_DC */
/* PHY CLK delay line delay code */
#define PHY_SDCLKDL_DC_R (DWC_MSHC_PTR_PHY_R + 0x1e)
@@ -158,10 +163,14 @@
#define PHY_SDCLKDL_DC_DEFAULT 0x32 /* default delay code */
#define PHY_SDCLKDL_DC_HS400 0x18 /* delay code for HS400 mode */
+#define PHY_SMPLDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x20)
+#define PHY_SMPLDL_CNFG_BYPASS_EN BIT(1)
+
/* PHY drift_cclk_rx delay line configuration setting */
#define PHY_ATDL_CNFG_R (DWC_MSHC_PTR_PHY_R + 0x21)
#define PHY_ATDL_CNFG_INPSEL_MASK GENMASK(3, 2) /* bits [3:2] */
#define PHY_ATDL_CNFG_INPSEL 0x3 /* delay line input source */
+#define PHY_ATDL_CNFG_INPSEL_SG2042 0x2 /* delay line input source for SG2042 */
/* PHY DLL control settings */
#define PHY_DLL_CTRL_R (DWC_MSHC_PTR_PHY_R + 0x24)
@@ -1015,6 +1024,90 @@ static int cv18xx_sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
return ret;
}
+static inline void sg2042_sdhci_phy_init(struct sdhci_host *host)
+{
+ u32 val;
+
+ /* Asset phy reset & set tx drive strength */
+ val = sdhci_readl(host, PHY_CNFG_R);
+ val &= ~PHY_CNFG_RSTN_DEASSERT;
+ val |= FIELD_PREP(PHY_CNFG_PHY_PWRGOOD_MASK, 1);
+ val |= FIELD_PREP(PHY_CNFG_PAD_SP_MASK, PHY_CNFG_PAD_SP_SG2042);
+ val |= FIELD_PREP(PHY_CNFG_PAD_SN_MASK, PHY_CNFG_PAD_SN_SG2042);
+ sdhci_writel(host, val, PHY_CNFG_R);
+
+ /* Configure phy pads */
+ val = PHY_PAD_RXSEL_3V3;
+ val |= FIELD_PREP(PHY_PAD_WEAKPULL_MASK, PHY_PAD_WEAKPULL_PULLUP);
+ val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P);
+ val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N_SG2042);
+ sdhci_writew(host, val, PHY_CMDPAD_CNFG_R);
+ sdhci_writew(host, val, PHY_DATAPAD_CNFG_R);
+ sdhci_writew(host, val, PHY_RSTNPAD_CNFG_R);
+
+ val = PHY_PAD_RXSEL_3V3;
+ val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P);
+ val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N_SG2042);
+ sdhci_writew(host, val, PHY_CLKPAD_CNFG_R);
+
+ val = PHY_PAD_RXSEL_3V3;
+ val |= FIELD_PREP(PHY_PAD_WEAKPULL_MASK, PHY_PAD_WEAKPULL_PULLDOWN);
+ val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_P_MASK, PHY_PAD_TXSLEW_CTRL_P);
+ val |= FIELD_PREP(PHY_PAD_TXSLEW_CTRL_N_MASK, PHY_PAD_TXSLEW_CTRL_N_SG2042);
+ sdhci_writew(host, val, PHY_STBPAD_CNFG_R);
+
+ /* Configure delay line */
+ /* Enable fixed delay */
+ sdhci_writeb(host, PHY_SDCLKDL_CNFG_EXTDLY_EN, PHY_SDCLKDL_CNFG_R);
+ /*
+ * Set delay line.
+ * Its recommended that bit UPDATE_DC[4] is 1 when SDCLKDL_DC is being written.
+ * Ensure UPDATE_DC[4] is '0' when not updating code.
+ */
+ val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R);
+ val |= PHY_SDCLKDL_CNFG_UPDATE;
+ sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R);
+ /* Add 10 * 70ps = 0.7ns for output delay */
+ sdhci_writeb(host, 10, PHY_SDCLKDL_DC_R);
+ val = sdhci_readb(host, PHY_SDCLKDL_CNFG_R);
+ val &= ~(PHY_SDCLKDL_CNFG_UPDATE);
+ sdhci_writeb(host, val, PHY_SDCLKDL_CNFG_R);
+
+ /* Set SMPLDL_CNFG, Bypass */
+ sdhci_writeb(host, PHY_SMPLDL_CNFG_BYPASS_EN, PHY_SMPLDL_CNFG_R);
+
+ /* Set ATDL_CNFG, tuning clk not use for init */
+ val = FIELD_PREP(PHY_ATDL_CNFG_INPSEL_MASK, PHY_ATDL_CNFG_INPSEL_SG2042);
+ sdhci_writeb(host, val, PHY_ATDL_CNFG_R);
+
+ /* Deasset phy reset */
+ val = sdhci_readl(host, PHY_CNFG_R);
+ val |= PHY_CNFG_RSTN_DEASSERT;
+ sdhci_writel(host, val, PHY_CNFG_R);
+}
+
+static void sg2042_sdhci_reset(struct sdhci_host *host, u8 mask)
+{
+ sdhci_reset(host, mask);
+
+ if (mask & SDHCI_RESET_ALL)
+ sg2042_sdhci_phy_init(host);
+}
+
+static int sg2042_init(struct device *dev, struct sdhci_host *host,
+ struct dwcmshc_priv *dwc_priv)
+{
+ static const char * const clk_ids[] = {"timer"};
+ int err;
+
+ err = dwcmshc_get_enable_other_clks(mmc_dev(host->mmc), dwc_priv,
+ ARRAY_SIZE(clk_ids), clk_ids);
+ if (err)
+ return err;
+
+ return 0;
+}
+
static const struct sdhci_ops sdhci_dwcmshc_ops = {
.set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
@@ -1056,6 +1149,16 @@ static const struct sdhci_ops sdhci_dwcmshc_cv18xx_ops = {
.platform_execute_tuning = cv18xx_sdhci_execute_tuning,
};
+static const struct sdhci_ops sdhci_dwcmshc_sg2042_ops = {
+ .set_clock = sdhci_set_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .set_uhs_signaling = dwcmshc_set_uhs_signaling,
+ .get_max_clock = dwcmshc_get_max_clock,
+ .reset = sg2042_sdhci_reset,
+ .adma_write_desc = dwcmshc_adma_write_desc,
+ .platform_execute_tuning = th1520_execute_tuning,
+};
+
static const struct dwcmshc_pltfm_data sdhci_dwcmshc_pdata = {
.pdata = {
.ops = &sdhci_dwcmshc_ops,
@@ -1104,6 +1207,15 @@ static const struct dwcmshc_pltfm_data sdhci_dwcmshc_cv18xx_pdata = {
},
};
+static const struct dwcmshc_pltfm_data sdhci_dwcmshc_sg2042_pdata = {
+ .pdata = {
+ .ops = &sdhci_dwcmshc_sg2042_ops,
+ .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+ },
+ .init = sg2042_init,
+};
+
static const struct cqhci_host_ops dwcmshc_cqhci_ops = {
.enable = dwcmshc_sdhci_cqe_enable,
.disable = sdhci_cqe_disable,
@@ -1196,6 +1308,10 @@ static const struct of_device_id sdhci_dwcmshc_dt_ids[] = {
.compatible = "thead,th1520-dwcmshc",
.data = &sdhci_dwcmshc_th1520_pdata,
},
+ {
+ .compatible = "sophgo,sg2042-dwcmshc",
+ .data = &sdhci_dwcmshc_sg2042_pdata,
+ },
{},
};
MODULE_DEVICE_TABLE(of, sdhci_dwcmshc_dt_ids);
--
2.34.1
