On Thu, 2024-07-18 at 00:25 +0300, Alisa-Dariana Roman wrote:
> Internal clock of AD719X devices can be made available on MCLK2 pin. Add
> clock provider to support this functionality when clock cells property
> is present.
>
> Signed-off-by: Alisa-Dariana Roman <alisa.roman@xxxxxxxxxx>
> ---
minor thing below you may consider if a re-spin is needed...
Reviewed-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
> drivers/iio/adc/ad7192.c | 92 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 92 insertions(+)
>
> diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
> index 042319f0c641..3f803b1eefcc 100644
> --- a/drivers/iio/adc/ad7192.c
> +++ b/drivers/iio/adc/ad7192.c
> @@ -8,6 +8,7 @@
> #include <linux/interrupt.h>
> #include <linux/bitfield.h>
> #include <linux/clk.h>
> +#include <linux/clk-provider.h>
> #include <linux/device.h>
> #include <linux/kernel.h>
> #include <linux/slab.h>
> @@ -201,6 +202,7 @@ struct ad7192_chip_info {
> struct ad7192_state {
> const struct ad7192_chip_info *chip_info;
> struct clk *mclk;
> + struct clk_hw int_clk_hw;
> u16 int_vref_mv;
> u32 aincom_mv;
> u32 fclk;
> @@ -406,6 +408,91 @@ static const char *const ad7192_clock_names[] = {
> "mclk"
> };
>
> +static struct ad7192_state *clk_hw_to_ad7192(struct clk_hw *hw)
> +{
> + return container_of(hw, struct ad7192_state, int_clk_hw);
> +}
> +
> +static unsigned long ad7192_clk_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + return AD7192_INT_FREQ_MHZ;
> +}
> +
> +static int ad7192_clk_output_is_enabled(struct clk_hw *hw)
> +{
> + struct ad7192_state *st = clk_hw_to_ad7192(hw);
> +
> + return st->clock_sel == AD7192_CLK_INT_CO;
> +}
> +
> +static int ad7192_clk_prepare(struct clk_hw *hw)
> +{
> + struct ad7192_state *st = clk_hw_to_ad7192(hw);
> + int ret;
> +
> + st->mode &= ~AD7192_MODE_CLKSRC_MASK;
> + st->mode |= AD7192_CLK_INT_CO;
> +
> + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
> + if (ret)
> + return ret;
> +
> + st->clock_sel = AD7192_CLK_INT_CO;
> +
> + return 0;
> +}
> +
> +static void ad7192_clk_unprepare(struct clk_hw *hw)
> +{
> + struct ad7192_state *st = clk_hw_to_ad7192(hw);
> + int ret;
> +
> + st->mode &= ~AD7192_MODE_CLKSRC_MASK;
> + st->mode |= AD7192_CLK_INT;
> +
> + ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
> + if (ret)
> + return;
> +
> + st->clock_sel = AD7192_CLK_INT;
> +}
> +
> +static const struct clk_ops ad7192_int_clk_ops = {
> + .recalc_rate = ad7192_clk_recalc_rate,
> + .is_enabled = ad7192_clk_output_is_enabled,
> + .prepare = ad7192_clk_prepare,
> + .unprepare = ad7192_clk_unprepare,
> +};
> +
> +static int ad7192_register_clk_provider(struct ad7192_state *st)
> +{
> + struct device *dev = &st->sd.spi->dev;
> + struct clk_init_data init = {};
> + int ret;
> +
> + if (!device_property_present(dev, "#clock-cells"))
> + return 0;
> +
> + if (!IS_ENABLED(CONFIG_COMMON_CLK))
> + return 0;
>
nit: This could be the first test to do. No point in calling
device_property_present() if CONFIG_COMMON_CLK is disabled. FWIW, the compiler should
be smart enough to sort things out but it would still be better (for readability) to
have this first.
- Nuno Sá
