[PATCH v2 12/13] PCI: qcom: Simulate PCIe hotplug using 'global' interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

Historically, Qcom PCIe RC controllers lack standard hotplug support. So
when an endpoint is attached to the SoC, users have to rescan the bus
manually to enumerate the device. But this can be avoided by simulating the
PCIe hotplug using Qcom specific way.

Qcom PCIe RC controllers are capable of generating the 'global' SPI
interrupt to the host CPUs. The device driver can use this event to
identify events such as PCIe link specific events, safety events etc...

One such event is the PCIe Link up event generated when an endpoint is
detected on the bus and the Link is 'up'. This event can be used to
simulate the PCIe hotplug in the Qcom SoCs.

So add support for capturing the PCIe Link up event using the 'global'
interrupt in the driver. Once the Link up event is received, the bus
underneath the host bridge is scanned to enumerate PCIe endpoint devices,
thus simulating hotplug.

All of the Qcom SoCs have only one rootport per controller instance. So
only a single 'Link up' event is generated for the PCIe controller.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 55 +++++++++++++++++++++++++++++++++-
 1 file changed, 54 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 0180edf3310e..a1d678fe7fa5 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -50,6 +50,9 @@
 #define PARF_AXI_MSTR_WR_ADDR_HALT_V2		0x1a8
 #define PARF_Q2A_FLUSH				0x1ac
 #define PARF_LTSSM				0x1b0
+#define PARF_INT_ALL_STATUS			0x224
+#define PARF_INT_ALL_CLEAR			0x228
+#define PARF_INT_ALL_MASK			0x22c
 #define PARF_SID_OFFSET				0x234
 #define PARF_BDF_TRANSLATE_CFG			0x24c
 #define PARF_SLV_ADDR_SPACE_SIZE		0x358
@@ -121,6 +124,9 @@
 /* PARF_LTSSM register fields */
 #define LTSSM_EN				BIT(8)
 
+/* PARF_INT_ALL_{STATUS/CLEAR/MASK} register fields */
+#define PARF_INT_ALL_LINK_UP			BIT(13)
+
 /* PARF_NO_SNOOP_OVERIDE register fields */
 #define WR_NO_SNOOP_OVERIDE_EN			BIT(1)
 #define RD_NO_SNOOP_OVERIDE_EN			BIT(3)
@@ -1488,6 +1494,29 @@ static void qcom_pcie_init_debugfs(struct qcom_pcie *pcie)
 				    qcom_pcie_link_transition_count);
 }
 
+static irqreturn_t qcom_pcie_global_irq_thread(int irq, void *data)
+{
+	struct qcom_pcie *pcie = data;
+	struct dw_pcie_rp *pp = &pcie->pci->pp;
+	struct device *dev = pcie->pci->dev;
+	u32 status = readl_relaxed(pcie->parf + PARF_INT_ALL_STATUS);
+
+	writel_relaxed(status, pcie->parf + PARF_INT_ALL_CLEAR);
+
+	if (FIELD_GET(PARF_INT_ALL_LINK_UP, status)) {
+		dev_dbg(dev, "Received Link up event. Starting enumeration!\n");
+		/* Rescan the bus to enumerate endpoint devices */
+		pci_lock_rescan_remove();
+		pci_rescan_bus(pp->bridge->bus);
+		pci_unlock_rescan_remove();
+	} else {
+		dev_WARN_ONCE(dev, 1, "Received unknown event. INT_STATUS: 0x%08x\n",
+			      status);
+	}
+
+	return IRQ_HANDLED;
+}
+
 static int qcom_pcie_probe(struct platform_device *pdev)
 {
 	const struct qcom_pcie_cfg *pcie_cfg;
@@ -1498,7 +1527,8 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	struct dw_pcie_rp *pp;
 	struct resource *res;
 	struct dw_pcie *pci;
-	int ret;
+	int ret, irq;
+	char *name;
 
 	pcie_cfg = of_device_get_match_data(dev);
 	if (!pcie_cfg || !pcie_cfg->ops) {
@@ -1617,6 +1647,27 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 		goto err_phy_exit;
 	}
 
+	name = devm_kasprintf(dev, GFP_KERNEL, "qcom_pcie_global_irq%d",
+			      pci_domain_nr(pp->bridge->bus));
+	if (!name) {
+		ret = -ENOMEM;
+		goto err_host_deinit;
+	}
+
+	irq = platform_get_irq_byname_optional(pdev, "global");
+	if (irq > 0) {
+		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+						qcom_pcie_global_irq_thread,
+						IRQF_ONESHOT, name, pcie);
+		if (ret) {
+			dev_err_probe(&pdev->dev, ret,
+				      "Failed to request Global IRQ\n");
+			goto err_host_deinit;
+		}
+
+		writel_relaxed(PARF_INT_ALL_LINK_UP, pcie->parf + PARF_INT_ALL_MASK);
+	}
+
 	qcom_pcie_icc_opp_update(pcie);
 
 	if (pcie->mhi)
@@ -1624,6 +1675,8 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_host_deinit:
+	dw_pcie_host_deinit(pp);
 err_phy_exit:
 	phy_exit(pcie->phy);
 err_pm_runtime_put:

-- 
2.25.1






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux