These properties are required by i2c-controller.yaml bindings.
Add them on SoC level, rather than on board level.
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index f7a91d43a0ffe..3f521441faf7e 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -303,6 +303,8 @@ adma_pwm_lpcg: clock-controller@5a590000 {
i2c0: i2c@5a800000 {
reg = <0x5a800000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>,
<&i2c0_lpcg IMX_LPCG_CLK_4>;
@@ -315,6 +317,8 @@ i2c0: i2c@5a800000 {
i2c1: i2c@5a810000 {
reg = <0x5a810000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>,
<&i2c1_lpcg IMX_LPCG_CLK_4>;
@@ -327,6 +331,8 @@ i2c1: i2c@5a810000 {
i2c2: i2c@5a820000 {
reg = <0x5a820000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>,
<&i2c2_lpcg IMX_LPCG_CLK_4>;
@@ -339,6 +345,8 @@ i2c2: i2c@5a820000 {
i2c3: i2c@5a830000 {
reg = <0x5a830000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>,
<&i2c3_lpcg IMX_LPCG_CLK_4>;
--
2.34.1
