From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Neither the imx8dxl-evk or imx8qm-mek have a Rohm DAC on them as far as
I can tell from online documentation, and they certainly do not have a
dh2228fv, as this device does not actually exist! Remove the DAC nodes
from the devicetrees as it is not acceptable to pretend to have a device
on a board in order to bind the spidev driver in Linux.
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 6 ------
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 6 ------
2 files changed, 12 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 1a74ac3ee4ee..4caaecc19227 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -722,12 +722,6 @@ &lpspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpspi3>;
status = "okay";
-
- spidev0: spi@0 {
- reg = <0>;
- compatible = "rohm,dh2228fv";
- spi-max-frequency = <30000000>;
- };
};
&iomuxc {
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 778741dbbb33..3f0fd147bbd0 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -287,12 +287,6 @@ &lpspi2 {
pinctrl-0 = <&pinctrl_lpspi2 &pinctrl_lpspi2_cs>;
cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>;
status = "okay";
-
- spidev0: spi@0 {
- reg = <0>;
- compatible = "rohm,dh2228fv";
- spi-max-frequency = <30000000>;
- };
};
&lsio_mu5 {
--
2.43.0
