[PATCH 2/2] iio: frequency: adf4377: add adf4378 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add separate handling for adf4378 within the driver.

The main difference between adf4377 and adf4378 is that adf4378 has only
one output which is handled by only one gpio.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
---
 drivers/iio/frequency/adf4377.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/frequency/adf4377.c b/drivers/iio/frequency/adf4377.c
index 9284c13f1abb..e02298a8b47f 100644
--- a/drivers/iio/frequency/adf4377.c
+++ b/drivers/iio/frequency/adf4377.c
@@ -387,6 +387,11 @@
 #define ADF4377_FREQ_PFD_250MHZ			(250 * HZ_PER_MHZ)
 #define ADF4377_FREQ_PFD_320MHZ			(320 * HZ_PER_MHZ)
 
+enum adf4377_dev_type {
+	ADF4377,
+	ADF4378,
+};
+
 enum {
 	ADF4377_FREQ,
 };
@@ -402,6 +407,7 @@ enum muxout_select_mode {
 
 struct adf4377_state {
 	struct spi_device	*spi;
+	enum adf4377_dev_type	type;
 	struct regmap		*regmap;
 	struct clk		*clkin;
 	/* Protect against concurrent accesses to the device and data content */
@@ -687,7 +693,7 @@ static void adf4377_gpio_init(struct adf4377_state *st)
 	if (st->gpio_enclk1)
 		gpiod_set_value(st->gpio_enclk1, 1);
 
-	if (st->gpio_enclk2)
+	if (st->gpio_enclk2 && st->type == ADF4377)
 		gpiod_set_value(st->gpio_enclk2, 1);
 }
 
@@ -889,11 +895,13 @@ static int adf4377_properties_parse(struct adf4377_state *st)
 		return dev_err_probe(&spi->dev, PTR_ERR(st->gpio_enclk1),
 				     "failed to get the CE GPIO\n");
 
-	st->gpio_enclk2 = devm_gpiod_get_optional(&st->spi->dev, "clk2-enable",
-						  GPIOD_OUT_LOW);
-	if (IS_ERR(st->gpio_enclk2))
-		return dev_err_probe(&spi->dev, PTR_ERR(st->gpio_enclk2),
-				     "failed to get the CE GPIO\n");
+	if (st->type == ADF4377) {
+		st->gpio_enclk2 = devm_gpiod_get_optional(&st->spi->dev, "clk2-enable",
+							  GPIOD_OUT_LOW);
+		if (IS_ERR(st->gpio_enclk2))
+			return dev_err_probe(&spi->dev, PTR_ERR(st->gpio_enclk2),
+					"failed to get the CE GPIO\n");
+	}
 
 	ret = device_property_match_property_string(&spi->dev, "adi,muxout-select",
 						    adf4377_muxout_modes,
@@ -945,6 +953,7 @@ static int adf4377_probe(struct spi_device *spi)
 
 	st->regmap = regmap;
 	st->spi = spi;
+	st->type = spi_get_device_id(spi)->driver_data;
 	mutex_init(&st->lock);
 
 	ret = adf4377_properties_parse(st);
@@ -964,13 +973,15 @@ static int adf4377_probe(struct spi_device *spi)
 }
 
 static const struct spi_device_id adf4377_id[] = {
-	{ "adf4377", 0 },
+	{ "adf4377", ADF4377 },
+	{ "adf4378", ADF4378 },
 	{}
 };
 MODULE_DEVICE_TABLE(spi, adf4377_id);
 
 static const struct of_device_id adf4377_of_match[] = {
 	{ .compatible = "adi,adf4377" },
+	{ .compatible = "adi,adf4378" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, adf4377_of_match);
-- 
2.45.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux