In the schematics, the MCLK2 pin is shown as connected to CODEC_CLK32K,
which is derived from the same 32KHZ_PMIC clock as Bluetooth/WiFi and
GPS clocks. 32KHZ_PMIC is connected to the BTCLK pin, represented in
mainline as S2MPS11_CLK_BT.
Add the MCLK2 clock to the WM1811 codec clock property to properly
describe the hardware.
Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx>
---
arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
index 45003967406a..46bdd0681afe 100644
--- a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
@@ -535,8 +535,9 @@ &i2c_4 {
wm1811: audio-codec@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
- clocks = <&pmu_system_controller 0>;
- clock-names = "MCLK1";
+ clocks = <&pmu_system_controller 0>,
+ <&s5m8767_osc S2MPS11_CLK_BT>;
+ clock-names = "MCLK1", "MCLK2";
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gpx3>;
--
2.45.2
