On 27.06.2024 5:54 PM, Marc Gonzalez wrote:
> From: Arnaud Vrac <avrac@xxxxxxxxxx>
>
> Port device nodes from vendor code.
>
> Signed-off-by: Arnaud Vrac <avrac@xxxxxxxxxx>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Signed-off-by: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/msm8998.dtsi | 100 +++++++++++++++++++++++++++++++++-
> 1 file changed, 99 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> index ba5e873f0f35f..417c12534823f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -2785,7 +2785,7 @@ mmcc: clock-controller@c8c0000 {
> <&mdss_dsi0_phy 0>,
> <&mdss_dsi1_phy 1>,
> <&mdss_dsi1_phy 0>,
> - <0>,
> + <&hdmi_phy 0>,
> <0>,
> <0>,
> <&gcc GCC_MMSS_GPLL0_DIV_CLK>;
> @@ -2890,6 +2890,14 @@ dpu_intf2_out: endpoint {
> remote-endpoint = <&mdss_dsi1_in>;
> };
> };
> +
> + port@2 {
> + reg = <2>;
> +
> + dpu_intf3_out: endpoint {
> + remote-endpoint = <&hdmi_in>;
> + };
> + };
> };
> };
>
> @@ -3045,6 +3053,96 @@ mdss_dsi1_phy: phy@c996400 {
>
> status = "disabled";
> };
> +
> + hdmi: hdmi-tx@c9a0000 {
Please prefix the labels (hdmi: and hdmi_phy:) with mdss_
Otherwise, this looks good
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
One thing I noticed (testing on the 8998 MTP), enabling MDSS (not necessarily
HDMI, mdss and mdp is enough) results in SMMU lockups about 30% of the time..
[ 4.911422] arm-smmu cd00000.iommu: FSR = 00000402 [Format=2 TF], SID=0x0
[ 4.913412] platform c901000.display-controller: Fixed dependency cycle(s) with /soc@0/display-subsystem@c900000/hdmi-tx@c9a0000
[ 4.923353] arm-smmu cd00000.iommu: FSYNR0 = 00000021 [S1CBNDX=0 PNU PLVL=1]
[ 4.927893] arm-smmu cd00000.iommu: FSR = 00000402 [Format=2 TF], SID=0x0
[ 4.930647] platform c9a0000.hdmi-tx: Fixed dependency cycle(s) with /soc@0/display-subsystem@c900000/display-controller@c901000
[ 4.941928] arm-smmu cd00000.iommu: FSYNR0 = 00000021 [S1CBNDX=0 PNU PLVL=1]
[ 4.944438] arm-smmu cd00000.iommu: FSR = 00000402 [Format=2 TF], SID=0x0
[ 4.952338] msm_hdmi_phy c9a0600.hdmi-phy: supply vddio not found, using dummy regulator
[ 4.956013] arm-smmu cd00000.iommu: FSYNR0 = 00000021 [S1CBNDX=0 PNU PLVL=1]
[ 4.961055] arm-smmu cd00000.iommu: FSR = 00000402 [Format=2 TF], SID=0x0
[ 4.967917] msm_hdmi_phy c9a0600.hdmi-phy: supply vcca not found, using dummy regulator
[ 4.974565] arm-smmu cd00000.iommu: FSYNR0 = 00000021 [S1CBNDX=0 PNU PLVL=1]
[ 4.977628] arm-smmu cd00000.iommu: FSR = 00000402 [Format=2 TF], SID=0x0
[ 4.984122] Bluetooth: hci0: setting up wcn399x
[ 4.989670] arm-smmu cd00000.iommu: FSYNR0 = 00000021 [S1CBNDX=0 PNU PLVL=1]
Konrad
