[PATCH v3] arm64: dts: imx93: update default value for snps,clk-csr

[Shenwei Wang <shenwei.wang@xxxxxxx>]

For the i.MX93 SoC, the default clock rate for the IP of STMMAC EQOS is
312.5 MHz. According to the following mapping table from the i.MX93
reference manual, this clock rate corresponds to a CSR value of 6.

 0000: CSR clock = 60-100 MHz; MDC clock = CSR clock/42
 0001: CSR clock = 100-150 MHz; MDC clock = CSR clock/62
 0010: CSR clock = 20-35 MHz; MDC clock = CSR clock/16
 0011: CSR clock = 35-60 MHz; MDC clock = CSR clock/26
 0100: CSR clock = 150-250 MHz; MDC clock = CSR clock/102
 0101: CSR clock = 250-300 MHz; MDC clock = CSR clock/124
 0110: CSR clock = 300-500 MHz; MDC clock = CSR clock/204
 0111: CSR clock = 500-800 MHz; MDC clock = CSR clock/324

Fixes: f2d03ba997cb ("arm64: dts: imx93: reorder device nodes")
Signed-off-by: Shenwei Wang <shenwei.wang@xxxxxxx>
---
Changes in V3:
- added the fix tag.

Changes in V2:
- improved the commit comments per Alexander's feedback

 arch/arm64/boot/dts/freescale/imx93.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 4a3f42355cb8..a0993022c102 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -1105,7 +1105,7 @@ eqos: ethernet@428a0000 {
 							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
 				assigned-clock-rates = <100000000>, <250000000>;
 				intf_mode = <&wakeupmix_gpr 0x28>;
-				snps,clk-csr = <0>;
+				snps,clk-csr = <6>;
 				nvmem-cells = <&eth_mac2>;
 				nvmem-cell-names = "mac-address";
 				status = "disabled";
--
2.34.1