Remove the reg-names property in the sata-phy node as it is not present
in the bindings and is not required by the driver.
Signed-off-by: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 769e151747c3..81cf387e1817 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -871,7 +871,6 @@ sata_phy0: phy@1b400000 {
compatible = "qcom,apq8064-sata-phy";
status = "disabled";
reg = <0x1b400000 0x200>;
- reg-names = "phy_mem";
clocks = <&gcc SATA_PHY_CFG_CLK>;
clock-names = "cfg";
#phy-cells = <0>;
--
2.45.2
