Hi Krzysztof,
Thanks for your review.
On 2024/7/12 15:49, Krzysztof Kozlowski wrote:
[ EXTERNAL EMAIL ]
On 12/07/2024 08:54, Xianwei Zhao via B4 Relay wrote:
From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
Add node for board info registers, which allows getting SoC family and
board revision.
For example, with MESON_GX_SOCINFO config enabled we can get the
following information for board with Amlogic S4 SoC:
soc soc0: Amlogic S4 (S805X2) Revision 37:a (2:1) Detecte
Signed-off-by: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index c11c947fa18c..316905ec191c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -763,6 +763,12 @@ reset: reset-controller@2000 {
#reset-cells = <1>;
};
+ sec_ao: ao-secure@10220 {
+ compatible = "amlogic,meson-gx-ao-secure", "syscon";
This is not gx, but s4, so incorrect compatible used. Same for all other
patches.
Will use fallback to fix it.
Best regards,
Krzysztof
