On Sophgo CV18XX platform, threshold strength of schmitt trigger can be configured. As this standard property is already supported by the common pinconf code. Add "input-schmitt" property in pincfg-node.yaml so that other platforms requiring such feature can make use of this property. Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxxxx> --- Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml index d0af21a564b4..e838fcac7f2a 100644 --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml @@ -88,6 +88,10 @@ properties: description: disable input on pin (no effect on output, such as disabling an input buffer) + input-schmitt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: threshold strength for schmitt-trigger + input-schmitt-enable: type: boolean description: enable schmitt-trigger mode -- 2.45.2