Hello Diederik,
On 2024-07-10 15:28, Diederik de Haas wrote:
From: Alex Bee <knaerzche@xxxxxxxxx>
The DW MCI controller driver will use them to reset the IP block before
initialisation.
Fixes: d717f7352ec6 ("arm64: dts: rockchip: add sdmmc/sdio/emmc nodes
for RK3328 SoCs")
Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx>
Signed-off-by: Diederik de Haas <didi.debian@xxxxxxxxx>
Looking good to me, cross-referencing the RK3328 TRM checks out.
Reviewed-by: Dragan Simic <dsimic@xxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 95c3f1303544..16b4faa22e4f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -910,6 +910,8 @@ sdmmc: mmc@ff500000 {
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
+ resets = <&cru SRST_MMC0>;
+ reset-names = "reset";
status = "disabled";
};
@@ -922,6 +924,8 @@ sdio: mmc@ff510000 {
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
+ resets = <&cru SRST_SDIO>;
+ reset-names = "reset";
status = "disabled";
};
@@ -934,6 +938,8 @@ emmc: mmc@ff520000 {
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
+ resets = <&cru SRST_EMMC>;
+ reset-names = "reset";
status = "disabled";
};
