Re: [PATCH v6 0/3] hwrng: add hwrng support for Rockchip RK3568

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Chen-Yu,

thank you for reviewing and testing.

On Sat, Jul 13, 2024 at 02:48:39PM +0800, Chen-Yu Tsai wrote:
> Hi,
> 
> On Sat, Jul 13, 2024 at 8:38 AM Daniel Golle <daniel@xxxxxxxxxxxxxx> wrote:
> >
> > Rockchip SoCs used to have a random number generator as part of their
> > crypto device.
> >
> > However newer Rockchip SoCs like the RK3568 have an independent True
> > Random Number Generator device. This patchset adds a driver for it and
> > enables it in the device tree.
> >
> 
> Have you tested any of the later iterations? For me it stopped working
> at v3. After v3 (including v3), all it spits out is zeros.

I've not examined the actual values it returns, I will do so in future
iterations.

Alsom, I misread the original rk_rng_write_ctl() function, I will bring
it back and also improve the comment describing it.

> 
> > v5 -> v6:
> >  * Patch 1: unchanged
> >
> >  * Patch 2: get rid of #ifdef
> >    - use if (IS_ENABLED(...)) { ... }instead of #ifdef inside functions
> >    - use __maybe_unused for functions previously enclosed by #ifdef'ery
> >
> >  * Patch 3: unchanged
> >
> > v4 -> v5:
> >  * Patch 1: always use RK3568 name
> >    - use full RK3568 name in patch description
> >    - add RK3568 to title in binding
> >
> >  * Patch 2: full name and cosmetics
> >    - also always mention RK3568 as there may be other RNG in other
> >      (future) Rockchip SoCs
> >    - remove debug output on successful probe
> >    - use MODULE_AUTHOR several times instead of single comma-separated
> >
> >  * Patch 3: unchanged
> >
> > v3 -> v4:
> >  * Patch 1: minor corrections
> >    - fix Rokchip -> Rockchip typo
> >    - change commit title as requested
> >
> >  * Patch 2: improved error handling and resource management
> >    - Always use writel() instead of writel_relaxed()
> >    - Use pm_runtime_resume_and_get
> >    - Correctly return error code in rk_rng_read()
> >    - Make use of devm_reset_control_array_get_exclusive
> >    - Use devm_pm_runtime_enable and there by get rid of rk_rng_remove()
> >
> >  * Patch 3:
> >    - Move node to conform with ordering by address
> >
> > v2 -> v3: patch adopted by Daniel Golle
> >  * Patch 1: address comments of Krzysztof Kozlowski, add MAINTAINERS
> >    - improved description
> >    - meaningful clock-names
> >    - add entry in MAINTAINERS files
> >
> >  * Patch 2: numerous code-style improvements
> >    - drop misleading rk_rng_write_ctl(), simplify I/O writes
> 
> This is probably the culprit. The RNG and RST control registers have
> enable bits in their top 16 bits. Without those set together with the
> actual bit values, the writes to the registers have no effect.
> 
> Please check all your writel calls against the TRM and add appropriate
> bitmasks for the upper 16 bits.

The upper 16 bits are apparently used as hardware mask when writing the
lower 16 bits...

I will send v7 after testing.


> 
> 
> ChenYu
> 
> >    - drop unused TRNG_RNG_DOUT_[1-7] macros
> >    - handle error handling for pm_runtime_get_sync()
> >    - use memcpy_fromio() instead of open coding for-loop
> >    - some minor white-spaces fixes
> >
> >  * Patch 3:
> >    - use clock-names as defined in dt-bindings
> >
> > v1 -> v2:
> >  * Patch 1: fix issues reported by Rob Herring and Krzysztof Kozlowski:
> >    - Rename rockchip-rng.yaml into rockchip,rk3568-rng.yaml
> >    - Fix binding title and description
> >    - Fix compatible property
> >    - Rename clocks and add the corresponding descriptions
> >    - Drop reset-names
> >    - Add a bus definition with #address-cells and #size-cells to the
> >      example.
> >
> >  * Patch 2: fix issue reported by kernel test robot <lkp@xxxxxxxxx>
> >    - Do not read the random registers as big endian, looking at the
> >      RK3568 TRM this is actually not needed. This fixes a sparse
> >      warning.
> >
> >  * Patch 3: unchanged
> >
> > Aurelien Jarno (3):
> >   dt-bindings: rng: Add Rockchip RK3568 TRNG
> >   hwrng: add hwrng driver for Rockchip RK3568 SoC
> >   arm64: dts: rockchip: add DT entry for RNG to RK356x
> >
> >  .../bindings/rng/rockchip,rk3568-rng.yaml     |  61 +++++
> >  MAINTAINERS                                   |   7 +
> >  arch/arm64/boot/dts/rockchip/rk356x.dtsi      |   9 +
> >  drivers/char/hw_random/Kconfig                |  14 ++
> >  drivers/char/hw_random/Makefile               |   1 +
> >  drivers/char/hw_random/rockchip-rng.c         | 220 ++++++++++++++++++
> >  6 files changed, 312 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/rng/rockchip,rk3568-rng.yaml
> >  create mode 100644 drivers/char/hw_random/rockchip-rng.c
> >
> > --
> > 2.45.2
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux