On Fri, Jun 07, 2024 at 05:53:15PM +0300, Dumitru Ceclan wrote:
> Add support for AD4111/AD4112/AD4114/AD4115/AD4116.
>
> The AD411X family encompasses a series of low power, low noise, 24-bit,
> sigma-delta analog-to-digital converters that offer a versatile range of
> specifications.
>
> This family of ADCs integrates an analog front end suitable for processing
> both fully differential and single-ended, bipolar voltage inputs
> addressing a wide array of industrial and instrumentation requirements.
>
> - All ADCs have inputs with a precision voltage divider with a division
> ratio of 10.
> - AD4116 has 5 low level inputs without a voltage divider.
> - AD4111 and AD4112 support current inputs (0 mA to 20 mA) using a 50ohm
> shunt resistor.
>
> Signed-off-by: Dumitru Ceclan <dumitru.ceclan@xxxxxxxxxx>
> ---
[...]
> @@ -1194,6 +1434,11 @@ static int ad7173_probe(struct spi_device *spi)
> }
>
> static const struct of_device_id ad7173_of_match[] = {
> + { .compatible = "ad4111", .data = &ad4111_device_info },
> + { .compatible = "ad4112", .data = &ad4112_device_info },
> + { .compatible = "ad4114", .data = &ad4114_device_info },
> + { .compatible = "ad4115", .data = &ad4115_device_info },
> + { .compatible = "ad4116", .data = &ad4116_device_info },
These are all missing the 'adi,' vendor prefix. Please fix.
> { .compatible = "adi,ad7172-2", .data = &ad7172_2_device_info },
> { .compatible = "adi,ad7172-4", .data = &ad7172_4_device_info },
> { .compatible = "adi,ad7173-8", .data = &ad7173_8_device_info },
