Re: [RFC 17/18] arm: dts: n950, n9: Add primary camera support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Sakari,

Thank you for the patch.

On Saturday 07 March 2015 23:41:14 Sakari Ailus wrote:
> Add support for the primary camera of the Nokia N950 and N9.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxx>
> ---
>  arch/arm/boot/dts/omap3-n9.dts       |   39 +++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/omap3-n950-n9.dtsi |    4 ----
>  arch/arm/boot/dts/omap3-n950.dts     |   39 +++++++++++++++++++++++++++++++
>  3 files changed, 78 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
> index 9938b5d..05f32ae 100644
> --- a/arch/arm/boot/dts/omap3-n9.dts
> +++ b/arch/arm/boot/dts/omap3-n9.dts
> @@ -16,3 +16,42 @@
>  	model = "Nokia N9";
>  	compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
>  };
> +
> +&i2c2 {
> +	clock-frequency = <400000>;
> +
> +	smia_1: camera@10 {
> +		compatible = "nokia,smia";
> +		reg = <0x10>;
> +		/* No reset gpio */
> +		vana-supply = <&vaux3>;
> +		clocks = <&omap3_isp 0>;
> +		clock-frequency = <9600000>;
> +		nokia,nvm-size = <1024>; /* 16 * 64 */

You could actually specify that as "<(16 * 64)>".

> +		link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
> +		port {
> +			smia_1_1: endpoint {
> +				clock-lanes = <0>;
> +				data-lanes = <1 2>;
> +				remote-endpoint = <&csi2a_ep>;
> +			};
> +		};
> +	};
> +};
> +
> +&omap3_isp {
> +	vdd-csiphy1-supply = <&vaux2>;
> +	vdd-csiphy2-supply = <&vaux2>;
> +	ports {
> +		port@2 {
> +			reg = <2>;
> +			csi2a_ep: endpoint {
> +				remote-endpoint = <&smia_1_1>;
> +				clock-lanes = <2>;
> +				data-lanes = <1 3>;
> +				crc = <1>;
> +				lane-polarity = <1 1 1>;
> +			};
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi
> b/arch/arm/boot/dts/omap3-n950-n9.dtsi index c41db94..51e5043 100644
> --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
> +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
> @@ -86,10 +86,6 @@
>  	regulator-max-microvolt = <2800000>;
>  };
> 
> -&i2c2 {
> -	clock-frequency = <400000>;
> -};
> -

What's the reason for moving this to the N9 and N950 DT files as you keep the 
same value in both ?

>  &i2c3 {
>  	clock-frequency = <400000>;
>  };
> diff --git a/arch/arm/boot/dts/omap3-n950.dts
> b/arch/arm/boot/dts/omap3-n950.dts index 261c558..2b2ed9c 100644
> --- a/arch/arm/boot/dts/omap3-n950.dts
> +++ b/arch/arm/boot/dts/omap3-n950.dts
> @@ -16,3 +16,42 @@
>  	model = "Nokia N950";
>  	compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
>  };
> +
> +&i2c2 {
> +	clock-frequency = <400000>;
> +
> +	smia_1: camera@10 {
> +		compatible = "nokia,smia";
> +		reg = <0x10>;
> +		/* No reset gpio */
> +		vana-supply = <&vaux3>;
> +		clocks = <&omap3_isp 0>;
> +		clock-frequency = <9600000>;
> +		nokia,nvm-size = <1024>; /* 16 * 64 */
> +		link-frequencies = /bits/ 64 <210000000 333600000 398400000>;
> +		port {
> +			smia_1_1: endpoint {
> +				clock-lanes = <0>;
> +				data-lanes = <1 2>;
> +				remote-endpoint = <&csi2a_ep>;
> +			};
> +		};
> +	};
> +};
> +
> +&omap3_isp {
> +	vdd-csiphy1-supply = <&vaux2>;
> +	vdd-csiphy2-supply = <&vaux2>;
> +	ports {
> +		port@2 {
> +			reg = <2>;
> +			csi2a_ep: endpoint {
> +				remote-endpoint = <&smia_1_1>;
> +				clock-lanes = <2>;
> +				data-lanes = <3 1>;
> +				crc = <1>;
> +				lane-polarity = <1 1 1>;
> +			};
> +		};
> +	};
> +};

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux