IPQ SoCs dont involve RPM in managing NoC related clocks and
there is no NoC scaling. Linux itself handles these clocks.
However, these should not be exposed as just clocks and align
with other Qualcomm SoCs that handle these clocks from a
interconnect provider.
Hence include icc provider capability to the gcc node so that
peripherals can use the interconnect facility to enable these
clocks. Change USB to use the icc-clk framework for the iface
clock.
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 573656587c0d..f58fd70be826 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/qcom,apss-ipq.h>
#include <dt-bindings/clock/qcom,ipq5332-gcc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,ipq5332.h>
/ {
interrupt-parent = <&intc>;
@@ -208,6 +209,7 @@ gcc: clock-controller@1800000 {
reg = <0x01800000 0x80000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #interconnect-cells = <1>;
clocks = <&xo_board>,
<&sleep_clk>,
<0>,
@@ -327,11 +329,9 @@ usb: usb@8af8800 {
"dm_hs_phy_irq";
clocks = <&gcc GCC_USB0_MASTER_CLK>,
- <&gcc GCC_SNOC_USB_CLK>,
<&gcc GCC_USB0_SLEEP_CLK>,
<&gcc GCC_USB0_MOCK_UTMI_CLK>;
clock-names = "core",
- "iface",
"sleep",
"mock_utmi";
@@ -342,6 +342,9 @@ usb: usb@8af8800 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ interconnects = <&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>,
+ <&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>;
+ interconnect-names = "usb-ddr", "apps-usb";
status = "disabled";
--
2.34.1
