Pass dtbs_check for qcom,apq8064-pinctrl.yaml.
Signed-off-by: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx>
---
v1 -> v2: split previous 2 commits from this patch, corrected commit message
.../boot/dts/qcom/qcom-apq8064-cm-qs600.dts | 25 +-
.../boot/dts/qcom/qcom-apq8064-ifc6410.dts | 25 +-
arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi | 350 +++++++-----------
.../qcom-apq8064-sony-xperia-lagan-yuga.dts | 10 +-
arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 34 +-
5 files changed, 166 insertions(+), 278 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
index 671d58cc2741..178c55c1efeb 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
@@ -188,24 +188,17 @@ &sdcc4 {
};
&tlmm_pinmux {
- card_detect: card_detect {
- mux {
- pins = "gpio26";
- function = "gpio";
- bias-disable;
- };
+ card_detect: card-detect-state {
+ pins = "gpio26";
+ function = "gpio";
+ bias-disable;
};
- pcie_pins: pcie_pinmux {
- mux {
- pins = "gpio27";
- function = "gpio";
- };
- conf {
- pins = "gpio27";
- drive-strength = <12>;
- bias-disable;
- };
+ pcie_pins: pcie-state {
+ pins = "gpio27";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-disable;
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
index ed86b24119c9..b3ff8010b149 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -321,24 +321,17 @@ &sdcc4 {
};
&tlmm_pinmux {
- card_detect: card_detect {
- mux {
- pins = "gpio26";
- function = "gpio";
- bias-disable;
- };
+ card_detect: card-detect-state {
+ pins = "gpio26";
+ function = "gpio";
+ bias-disable;
};
- pcie_pins: pcie_pinmux {
- mux {
- pins = "gpio27";
- function = "gpio";
- };
- conf {
- pins = "gpio27";
- drive-strength = <12>;
- bias-disable;
- };
+ pcie_pins: pcie-state {
+ pins = "gpio27";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-disable;
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
index 107fc19f1331..e53de709e9d1 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-pins.dtsi
@@ -1,318 +1,218 @@
// SPDX-License-Identifier: GPL-2.0
&tlmm_pinmux {
- sdc4_gpios: sdc4-gpios {
- pios {
- pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
- function = "sdc4";
- };
- };
-
- sdcc1_pins: sdcc1-pin-active {
- clk {
+ sdcc1_default_state: sdcc1-default-state {
+ clk-pins {
pins = "sdc1_clk";
drive-strength = <16>;
bias-disable;
};
- cmd {
+ cmd-pins {
pins = "sdc1_cmd";
drive-strength = <10>;
bias-pull-up;
};
- data {
+ data-pins {
pins = "sdc1_data";
drive-strength = <10>;
bias-pull-up;
};
};
- sdcc3_pins: sdcc3-pin-active {
- clk {
+ sdcc3_default_state: sdcc3-default-state {
+ clk-pins {
pins = "sdc3_clk";
drive-strength = <8>;
bias-disable;
};
- cmd {
+ cmd-pins {
pins = "sdc3_cmd";
drive-strength = <8>;
bias-pull-up;
};
- data {
+ data-pins {
pins = "sdc3_data";
drive-strength = <8>;
bias-pull-up;
};
};
- ps_hold: ps_hold {
- mux {
- pins = "gpio78";
- function = "ps_hold";
- };
+ sdc4_default_state: sdc4-default-state {
+ pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+ function = "sdc4";
};
- i2c1_pins: i2c1 {
- mux {
- pins = "gpio20", "gpio21";
- function = "gsbi1";
- };
+ gsbi1_uart_2pins: gsbi1-uart-2pins-state {
+ pins = "gpio18", "gpio19";
+ function = "gsbi1";
+ };
- pinconf {
- pins = "gpio20", "gpio21";
- drive-strength = <16>;
- bias-disable;
- };
+ gsbi1_uart_4pins: gsbi1-uart-4pins-state {
+ pins = "gpio18", "gpio19", "gpio20", "gpio21";
+ function = "gsbi1";
};
- i2c1_pins_sleep: i2c1_pins_sleep {
- mux {
- pins = "gpio20", "gpio21";
- function = "gpio";
- };
- pinconf {
- pins = "gpio20", "gpio21";
+ gsbi4_uart_pin_a: gsbi4-uart-pin-active-state {
+ rx-pins {
+ pins = "gpio11";
+ function = "gsbi4";
drive-strength = <2>;
bias-disable;
};
- };
- gsbi1_uart_2pins: gsbi1_uart_2pins {
- mux {
- pins = "gpio18", "gpio19";
- function = "gsbi1";
+ tx-pins {
+ pins = "gpio10";
+ function = "gsbi4";
+ drive-strength = <4>;
+ bias-disable;
};
};
- gsbi1_uart_4pins: gsbi1_uart_4pins {
- mux {
- pins = "gpio18", "gpio19", "gpio20", "gpio21";
- function = "gsbi1";
- };
+ gsbi6_uart_2pins: gsbi6-uart-2pins-state {
+ pins = "gpio14", "gpio15";
+ function = "gsbi6";
};
- i2c2_pins: i2c2 {
- mux {
- pins = "gpio24", "gpio25";
- function = "gsbi2";
- };
-
- pinconf {
- pins = "gpio24", "gpio25";
- drive-strength = <16>;
- bias-disable;
- };
+ gsbi6_uart_4pins: gsbi6-uart-4pins-state {
+ pins = "gpio14", "gpio15", "gpio16", "gpio17";
+ function = "gsbi6";
};
- i2c2_pins_sleep: i2c2_pins_sleep {
- mux {
- pins = "gpio24", "gpio25";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio24", "gpio25";
- drive-strength = <2>;
- bias-disable;
- };
+ gsbi7_uart_2pins: gsbi7-uart-2pins-state {
+ pins = "gpio82", "gpio83";
+ function = "gsbi7";
};
- i2c3_pins: i2c3 {
- mux {
- pins = "gpio8", "gpio9";
- function = "gsbi3";
- };
-
- pinconf {
- pins = "gpio8", "gpio9";
- drive-strength = <16>;
- bias-disable;
- };
+ gsbi7_uart_4pins: gsbi7_uart_4pins-state {
+ pins = "gpio82", "gpio83", "gpio84", "gpio85";
+ function = "gsbi7";
};
- i2c3_pins_sleep: i2c3_pins_sleep {
- mux {
- pins = "gpio8", "gpio9";
- function = "gpio";
- };
- pinconf {
- pins = "gpio8", "gpio9";
- drive-strength = <2>;
- bias-disable;
- };
+ i2c1_default_state: i2c1-default-state {
+ pins = "gpio20", "gpio21";
+ function = "gsbi1";
+ drive-strength = <16>;
+ bias-disable;
};
- i2c4_pins: i2c4 {
- mux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- };
-
- pinconf {
- pins = "gpio12", "gpio13";
- drive-strength = <16>;
- bias-disable;
- };
+ i2c1_sleep_state: i2c1-sleep-state {
+ pins = "gpio20", "gpio21";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- i2c4_pins_sleep: i2c4_pins_sleep {
- mux {
- pins = "gpio12", "gpio13";
- function = "gpio";
- };
- pinconf {
- pins = "gpio12", "gpio13";
- drive-strength = <2>;
- bias-disable;
- };
+ i2c2_default_state: i2c2-default-state {
+ pins = "gpio24", "gpio25";
+ function = "gsbi2";
+ drive-strength = <16>;
+ bias-disable;
};
- spi5_default: spi5_default {
- pinmux {
- pins = "gpio51", "gpio52", "gpio54";
- function = "gsbi5";
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio53";
- };
-
- pinconf {
- pins = "gpio51", "gpio52", "gpio54";
- drive-strength = <16>;
- bias-disable;
- };
-
- pinconf_cs {
- pins = "gpio53";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
+ i2c2_sleep_state: i2c2-sleep-state {
+ pins = "gpio24", "gpio25";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- spi5_sleep: spi5_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio51", "gpio52", "gpio53", "gpio54";
- };
-
- pinconf {
- pins = "gpio51", "gpio52", "gpio53", "gpio54";
- drive-strength = <2>;
- bias-pull-down;
- };
+ i2c3_default_state: i2c3-default-state {
+ pins = "gpio8", "gpio9";
+ function = "gsbi3";
+ drive-strength = <16>;
+ bias-disable;
};
- i2c6_pins: i2c6 {
- mux {
- pins = "gpio16", "gpio17";
- function = "gsbi6";
- };
-
- pinconf {
- pins = "gpio16", "gpio17";
- drive-strength = <16>;
- bias-disable;
- };
+ i2c3_sleep_state: i2c3-sleep-state {
+ pins = "gpio8", "gpio9";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- i2c6_pins_sleep: i2c6_pins_sleep {
- mux {
- pins = "gpio16", "gpio17";
- function = "gpio";
- };
- pinconf {
- pins = "gpio16", "gpio17";
- drive-strength = <2>;
- bias-disable;
- };
+ i2c4_default_state: i2c4-default-state {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <16>;
+ bias-disable;
};
- gsbi4_uart_pin_a: gsbi4-uart-pin-active-state {
- rx-pins {
- pins = "gpio11";
- function = "gsbi4";
- drive-strength = <2>;
- bias-disable;
- };
-
- tx-pins {
- pins = "gpio10";
- function = "gsbi4";
- drive-strength = <4>;
- bias-disable;
- };
+ i2c4_sleep_state: i2c4-sleep-state {
+ pins = "gpio12", "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- gsbi6_uart_2pins: gsbi6_uart_2pins {
- mux {
- pins = "gpio14", "gpio15";
- function = "gsbi6";
- };
+ i2c6_default_state: i2c6-default-state {
+ pins = "gpio16", "gpio17";
+ function = "gsbi6";
+ drive-strength = <16>;
+ bias-disable;
};
- gsbi6_uart_4pins: gsbi6_uart_4pins {
- mux {
- pins = "gpio14", "gpio15", "gpio16", "gpio17";
- function = "gsbi6";
- };
+ i2c6_sleep_state: i2c6-sleep-state {
+ pins = "gpio16", "gpio17";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- gsbi7_uart_2pins: gsbi7_uart_2pins {
- mux {
- pins = "gpio82", "gpio83";
- function = "gsbi7";
- };
+ i2c7_default_state: i2c7-default-state {
+ pins = "gpio84", "gpio85";
+ function = "gsbi7";
+ drive-strength = <16>;
+ bias-disable;
};
- gsbi7_uart_4pins: gsbi7_uart_4pins {
- mux {
- pins = "gpio82", "gpio83", "gpio84", "gpio85";
- function = "gsbi7";
- };
+ i2c7_sleep_state: i2c7-sleep-state {
+ pins = "gpio84", "gpio85";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- i2c7_pins: i2c7 {
- mux {
- pins = "gpio84", "gpio85";
- function = "gsbi7";
+ spi5_default_state: spi5-default-state {
+ spi5-pins {
+ pins = "gpio51", "gpio52", "gpio54";
+ function = "gsbi5";
+ drive-strength = <16>;
+ bias-disable;
};
- pinconf {
- pins = "gpio84", "gpio85";
+ spi5-cs-pins {
+ pins = "gpio53";
+ function = "gpio";
drive-strength = <16>;
bias-disable;
+ output-high;
};
};
- i2c7_pins_sleep: i2c7_pins_sleep {
- mux {
- pins = "gpio84", "gpio85";
+ spi5_sleep_state: spi5-sleep-state {
+ spi5-pins {
+ pins = "gpio51", "gpio52", "gpio53", "gpio54";
function = "gpio";
- };
- pinconf {
- pins = "gpio84", "gpio85";
drive-strength = <2>;
- bias-disable;
+ bias-pull-down;
};
};
- riva_fm_pin_a: riva-fm-active {
+ riva_fm_pin_a: riva-fm-active-state {
pins = "gpio14", "gpio15";
function = "riva_fm";
};
- riva_bt_pin_a: riva-bt-active {
+ riva_bt_pin_a: riva-bt-active-state {
pins = "gpio16", "gpio17";
function = "riva_bt";
};
- riva_wlan_pin_a: riva-wlan-active {
+ riva_wlan_pin_a: riva-wlan-active-state {
pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
function = "riva_wlan";
@@ -320,22 +220,24 @@ riva_wlan_pin_a: riva-wlan-active {
bias-pull-down;
};
- hdmi_pinctrl: hdmi-pinctrl {
- mux {
- pins = "gpio70", "gpio71", "gpio72";
- function = "hdmi";
- };
-
- pinconf_ddc {
+ hdmi_pinctrl: hdmi-pinctrl-state {
+ ddc-pins {
pins = "gpio70", "gpio71";
+ function = "hdmi";
bias-pull-up;
drive-strength = <2>;
};
- pinconf_hpd {
+ hpd-pins {
pins = "gpio72";
+ function = "hdmi";
bias-pull-down;
drive-strength = <16>;
};
};
+
+ ps_hold_default_state: ps-hold-default-state {
+ pins = "gpio78";
+ function = "ps_hold";
+ };
};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 2412aa3e3e8d..7752f07973f9 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -373,21 +373,21 @@ &sdcc3 {
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
+ pinctrl-0 = <&sdcc3_default_state>, <&sdcc3_cd_pin_a>;
status = "okay";
};
&tlmm_pinmux {
- gsbi5_uart_pin_a: gsbi5-uart-pin-active {
- rx {
+ gsbi5_uart_pin_a: gsbi5-uart-pin-active-state {
+ rx-pins {
pins = "gpio52";
function = "gsbi5";
drive-strength = <2>;
bias-pull-up;
};
- tx {
+ tx-pins {
pins = "gpio51";
function = "gsbi5";
drive-strength = <4>;
@@ -396,7 +396,7 @@ tx {
};
- sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+ sdcc3_cd_pin_a: sdcc3-cd-pin-active-state {
pins = "gpio26";
function = "gpio";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 769e151747c3..00f273ffea9c 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -302,7 +302,7 @@ tlmm_pinmux: pinctrl@800000 {
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&ps_hold>;
+ pinctrl-0 = <&ps_hold_default_state>;
};
sfpb_wrapper_mutex: syscon@1200000 {
@@ -435,8 +435,8 @@ gsbi1_serial: serial@12450000 {
gsbi1_i2c: i2c@12460000 {
compatible = "qcom,i2c-qup-v1.1.1";
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-1 = <&i2c1_pins_sleep>;
+ pinctrl-0 = <&i2c1_default_state>;
+ pinctrl-1 = <&i2c1_sleep_state>;
pinctrl-names = "default", "sleep";
reg = <0x12460000 0x1000>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
@@ -465,8 +465,8 @@ gsbi2: gsbi@12480000 {
gsbi2_i2c: i2c@124a0000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x124a0000 0x1000>;
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-1 = <&i2c2_pins_sleep>;
+ pinctrl-0 = <&i2c2_default_state>;
+ pinctrl-1 = <&i2c2_sleep_state>;
pinctrl-names = "default", "sleep";
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
@@ -489,8 +489,8 @@ gsbi3: gsbi@16200000 {
ranges;
gsbi3_i2c: i2c@16280000 {
compatible = "qcom,i2c-qup-v1.1.1";
- pinctrl-0 = <&i2c3_pins>;
- pinctrl-1 = <&i2c3_pins_sleep>;
+ pinctrl-0 = <&i2c3_default_state>;
+ pinctrl-1 = <&i2c3_sleep_state>;
pinctrl-names = "default", "sleep";
reg = <0x16280000 0x1000>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
@@ -528,8 +528,8 @@ gsbi4_serial: serial@16340000 {
gsbi4_i2c: i2c@16380000 {
compatible = "qcom,i2c-qup-v1.1.1";
- pinctrl-0 = <&i2c4_pins>;
- pinctrl-1 = <&i2c4_pins_sleep>;
+ pinctrl-0 = <&i2c4_default_state>;
+ pinctrl-1 = <&i2c4_sleep_state>;
pinctrl-names = "default", "sleep";
reg = <0x16380000 0x1000>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
@@ -565,8 +565,8 @@ gsbi5_spi: spi@1a280000 {
compatible = "qcom,spi-qup-v1.1.1";
reg = <0x1a280000 0x1000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-0 = <&spi5_default>;
- pinctrl-1 = <&spi5_sleep>;
+ pinctrl-0 = <&spi5_default_state>;
+ pinctrl-1 = <&spi5_sleep_state>;
pinctrl-names = "default", "sleep";
clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
@@ -599,8 +599,8 @@ gsbi6_serial: serial@16540000 {
gsbi6_i2c: i2c@16580000 {
compatible = "qcom,i2c-qup-v1.1.1";
- pinctrl-0 = <&i2c6_pins>;
- pinctrl-1 = <&i2c6_pins_sleep>;
+ pinctrl-0 = <&i2c6_default_state>;
+ pinctrl-1 = <&i2c6_sleep_state>;
pinctrl-names = "default", "sleep";
reg = <0x16580000 0x1000>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
@@ -635,8 +635,8 @@ gsbi7_serial: serial@16640000 {
gsbi7_i2c: i2c@16680000 {
compatible = "qcom,i2c-qup-v1.1.1";
- pinctrl-0 = <&i2c7_pins>;
- pinctrl-1 = <&i2c7_pins_sleep>;
+ pinctrl-0 = <&i2c7_default_state>;
+ pinctrl-1 = <&i2c7_sleep_state>;
pinctrl-names = "default", "sleep";
reg = <0x16680000 0x1000>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
@@ -945,7 +945,7 @@ sdcc4: mmc@121c0000 {
dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
- pinctrl-0 = <&sdc4_gpios>;
+ pinctrl-0 = <&sdc4_default_state>;
};
sdcc4bam: dma-controller@121c2000 {
@@ -962,7 +962,7 @@ sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
pinctrl-names = "default";
- pinctrl-0 = <&sdcc1_pins>;
+ pinctrl-0 = <&sdcc1_default_state>;
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
--
2.45.2
