It's absent on (most?) laptops that only have 2 type-C ports (of which
there are quite a few, and coming upstream too).
Keep it disabled by default and re-enable it on actual users.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 4 ----
arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 4 ++++
arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 4 ++++
arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi | 2 ++
arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 12 ++++++++----
5 files changed, 18 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index 7fb980fcb307..ce2b12afb749 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -488,10 +488,6 @@ &smb2360_1_eusb2_repeater {
vdd3-supply = <&vreg_l14b_3p0>;
};
-&smb2360_2 {
- status = "disabled";
-};
-
&tlmm {
gpio-reserved-ranges = <34 2>, /* Unused */
<44 4>, /* SPI (TPM) */
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 6152bcd0bc1f..7b90c9e40e37 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -821,6 +821,10 @@ &smb2360_1_eusb2_repeater {
vdd3-supply = <&vreg_l14b_3p0>;
};
+&smb2360_2 {
+ status = "okay";
+};
+
&smb2360_2_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l8b_3p0>;
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index fbff558f5b07..8d6222dd80e7 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -689,6 +689,10 @@ &smb2360_1_eusb2_repeater {
vdd3-supply = <&vreg_l14b_3p0>;
};
+&smb2360_2 {
+ status = "okay";
+};
+
&smb2360_2_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l8b_3p0>;
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
index e34e70922cd3..a5ca0fa4e5ae 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
@@ -509,6 +509,8 @@ smb2360_2: pmic@b {
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
+
smb2360_2_eusb2_repeater: phy@fd00 {
compatible = "qcom,smb2360-eusb2-repeater";
reg = <0xfd00>;
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 72a4f4138616..544c9cd72f2c 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -715,10 +715,6 @@ &remoteproc_cdsp {
status = "okay";
};
-&smb2360_3 {
- status = "okay";
-};
-
&smb2360_0_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l2b_3p0>;
@@ -729,11 +725,19 @@ &smb2360_1_eusb2_repeater {
vdd3-supply = <&vreg_l14b_3p0>;
};
+&smb2360_2 {
+ status = "okay";
+};
+
&smb2360_2_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l8b_3p0>;
};
+&smb2360_3 {
+ status = "okay";
+};
+
&swr0 {
pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
pinctrl-names = "default";
--
2.45.2
