a while ago, we changed product name (hardware is same), from: Radxa ZERO2 to: Radxa ZERO 2 Pro this patch reflect the change in dts. Signed-off-by: FUKAUMI Naoki <naoki@xxxxxxxxx> --- arch/arm64/boot/dts/amlogic/Makefile | 2 +- ...-g12b-radxa-zero2.dts => meson-g12b-radxa-zero-2pro.dts} | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) rename arch/arm64/boot/dts/amlogic/{meson-g12b-radxa-zero2.dts => meson-g12b-radxa-zero-2pro.dts} (98%) diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 29417f04f886..5694ad0edcde 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -31,7 +31,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-go-ultra.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2l.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-g12b-radxa-zero2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-radxa-zero-2pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-bananapi-m2s.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero-2pro.dts similarity index 98% rename from arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts rename to arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero-2pro.dts index 8445701100d0..5514ca9a62fb 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero-2pro.dts @@ -16,8 +16,8 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "radxa,zero2", "amlogic,a311d", "amlogic,g12b"; - model = "Radxa Zero2"; + compatible = "radxa,zero-2pro", "amlogic,a311d", "amlogic,g12b"; + model = "Radxa ZERO 2 Pro"; aliases { serial0 = &uart_AO; @@ -169,7 +169,7 @@ vddcpu_b: regulator-vddcpu-b { sound { compatible = "amlogic,axg-sound-card"; - model = "RADXA-ZERO2"; + model = "RADXA-ZERO-2PRO"; audio-aux-devs = <&tdmout_b>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", -- 2.43.0