Re: [PATCH v1 4/4] drm/panel: ili9806e: Break some CMDS into helper functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, Jul 10, 2024 at 2:02 AM Michael Walle <mwalle@xxxxxxxxxx> wrote:
>
> On Wed Jul 10, 2024 at 10:47 AM CEST, Cong Yang wrote:
> > Break select page cmds into helper function.
>
> Why though? I don't find that anything easier to read. In fact, I
> deliberately chose not to factor that out into a function. It's just
> a sequence of magic commands, taken straight from the datasheet. So,
> I'd like to keep it that way.

The consensus of previous discussion on the lists was that folks
agreed that we should, where possible, make it more obvious what these
magic sequences of commands were doing. IMO separating out the page
switch command helps. Certainly I'm always happy to hear other
opinions, though.


> -michael
>
> > Signed-off-by: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/panel/panel-ilitek-ili9806e.c | 14 ++++++++++----
> >  1 file changed, 10 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9806e.c b/drivers/gpu/drm/panel/panel-ilitek-ili9806e.c
> > index e4a44cd26c4d..68fb9a1a4d80 100644
> > --- a/drivers/gpu/drm/panel/panel-ilitek-ili9806e.c
> > +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9806e.c
> > @@ -35,6 +35,12 @@ struct ili9806e_panel {
> >       enum drm_panel_orientation orientation;
> >  };
> >
> > +#define ILI9806E_DCS_SWITCH_PAGE     0xff
> > +
> > +#define ili9806e_switch_page(ctx, page) \
> > +     mipi_dsi_dcs_write_seq_multi(ctx, ILI9806E_DCS_SWITCH_PAGE, \
> > +                                  0xff, 0x98, 0x06, 0x04, (page))
> > +
> >  static const char * const regulator_names[] = {
> >       "vdd",
> >       "vccio",
> > @@ -227,7 +233,7 @@ static void ili9806e_dsi_remove(struct mipi_dsi_device *dsi)
> >  static void com35h3p70ulc_init(struct mipi_dsi_multi_context *ctx)
> >  {
> >       /* Switch to page 1 */
> > -     mipi_dsi_dcs_write_seq_multi(ctx, 0xff, 0xff, 0x98, 0x06, 0x04, 0x01);
> > +     ili9806e_switch_page(ctx, 0x01);

I think with your change you should remove the "Switch to page X"
comments since they're now obvious. Other than that, I'm happy with:

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux