Hi, This series fixes two issues in the gs101 clocking / uart handling & related device tree binding: 1) the binding omitted specifying the required number of clocks for the UART 2) an incorrect work-around in the gs101 clock driver The 2nd point is essentially the last remaining patch [1] with all review comments addressed, from the series [2] that was sent earlier this year, see lore links below. As requested, I'm also documenting (in the binding) the hand-over issue between earlycon and (real) console driver that we have on gs101, see [3]. While doing that, I noticed the omission mentioned in point 1) above, hence this series. To avoid confusion, I'm marking this whole series as v3 because the patch to clk-gs101.c had been sent as v2 previously, and this supersedes it. Signed-off-by: André Draszik <andre.draszik@xxxxxxxxxx> [1] https://lore.kernel.org/all/20240130093812.1746512-6-andre.draszik@xxxxxxxxxx/ [2] https://lore.kernel.org/all/20240130093812.1746512-1-andre.draszik@xxxxxxxxxx/ [3] https://lore.kernel.org/all/d45de3b2bb6b48653842cf1f74e58889ed6783ae.camel@xxxxxxxxxx/ --- André Draszik (2): dt-bindings: serial: samsung: fix maxItems for gs101 & document earlycon requirements clk: samsung: gs101: don't mark non-essential (UART) clocks critical Documentation/devicetree/bindings/serial/samsung_uart.yaml | 14 ++++++++++++++ drivers/clk/samsung/clk-gs101.c | 6 ++---- 2 files changed, 16 insertions(+), 4 deletions(-) --- base-commit: 523b23f0bee3014a7a752c9bb9f5c54f0eddae88 change-id: 20240430-gs101-non-essential-clocks-2-6a3280fa1be8 Best regards, -- André Draszik <andre.draszik@xxxxxxxxxx>
