Re: [PATCH 2/2] leds: leds-pca995x: Add support for NXP PCA9956B

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/10/24 8:15 AM, Pieterjan Camerlynck via B4 Relay wrote:
From: Pieterjan Camerlynck <pieterjanca@xxxxxxxxx>

Add support for PCA9956B chip, which belongs to the same family.

This chip features 24 instead of 16 outputs, so add a chipdef struct to
deal with the different register layouts.

Signed-off-by: Pieterjan Camerlynck <pieterjanca@xxxxxxxxx>
---
  drivers/leds/leds-pca995x.c | 88 ++++++++++++++++++++++++++-------------------
  1 file changed, 52 insertions(+), 36 deletions(-)

diff --git a/drivers/leds/leds-pca995x.c b/drivers/leds/leds-pca995x.c
index 78215dff1499..4cd2828a3f2d 100644
--- a/drivers/leds/leds-pca995x.c
+++ b/drivers/leds/leds-pca995x.c
@@ -19,10 +19,6 @@
  #define PCA995X_MODE1			0x00
  #define PCA995X_MODE2			0x01
  #define PCA995X_LEDOUT0			0x02
-#define PCA9955B_PWM0			0x08
-#define PCA9952_PWM0			0x0A
-#define PCA9952_IREFALL			0x43
-#define PCA9955B_IREFALL		0x45
/* Auto-increment disabled. Normal mode */
  #define PCA995X_MODE1_CFG		0x00
@@ -34,17 +30,43 @@
  #define PCA995X_LDRX_MASK		0x3
  #define PCA995X_LDRX_BITS		2
-#define PCA995X_MAX_OUTPUTS 16
  #define PCA995X_OUTPUTS_PER_REG		4
#define PCA995X_IREFALL_FULL_CFG 0xFF
  #define PCA995X_IREFALL_HALF_CFG	(PCA995X_IREFALL_FULL_CFG / 2)
-#define PCA995X_TYPE_NON_B 0
-#define PCA995X_TYPE_B			1
-
  #define ldev_to_led(c)	container_of(c, struct pca995x_led, ldev)
+enum pca995x_type {
+	pca9952,
+	pca9955b,
+	pca9956b,
+};

This enum shouldn't be needed (see below).

+struct pca995x_chipdef {
+	unsigned int num_leds;
+	u8 pwm_base;
+	u8 irefall;
+};
+
+static const struct pca995x_chipdef pca995x_chipdefs[] = {

Define three separate static const struct pca995x_chipdef {} , one for each chip type ...

+	[pca9952] = {
+		.num_leds	= 16,
+		.pwm_base	= 0x0a,
+		.irefall	= 0x43,
+	},
+	[pca9955b] = {
+		.num_leds	= 16,
+		.pwm_base	= 0x08,
+		.irefall	= 0x45,
+	},
+	[pca9956b] = {
+		.num_leds	= 24,
+		.pwm_base	= 0x0a,
+		.irefall	= 0x40,
+	},
+};
+
  struct pca995x_led {
  	unsigned int led_no;
  	struct led_classdev ldev;
@@ -52,9 +74,9 @@ struct pca995x_led {
  };
struct pca995x_chip {
+	const struct pca995x_chipdef *chipdef;
  	struct regmap *regmap;
-	struct pca995x_led leds[PCA995X_MAX_OUTPUTS];
-	int btype;
+	struct pca995x_led leds[];
  };
static int pca995x_brightness_set(struct led_classdev *led_cdev,
@@ -62,10 +84,11 @@ static int pca995x_brightness_set(struct led_classdev *led_cdev,
  {
  	struct pca995x_led *led = ldev_to_led(led_cdev);
  	struct pca995x_chip *chip = led->chip;
+	const struct pca995x_chipdef *chipdef = chip->chipdef;
  	u8 ledout_addr, pwmout_addr;
  	int shift, ret;
- pwmout_addr = (chip->btype ? PCA9955B_PWM0 : PCA9952_PWM0) + led->led_no;
+	pwmout_addr = (chipdef->pwm_base) + led->led_no;
  	ledout_addr = PCA995X_LEDOUT0 + (led->led_no / PCA995X_OUTPUTS_PER_REG);
  	shift = PCA995X_LDRX_BITS * (led->led_no % PCA995X_OUTPUTS_PER_REG);
@@ -101,24 +124,24 @@ static const struct regmap_config pca995x_regmap = { static int pca995x_probe(struct i2c_client *client)
  {
-	struct fwnode_handle *led_fwnodes[PCA995X_MAX_OUTPUTS] = { 0 };
  	struct fwnode_handle *np, *child;
  	struct device *dev = &client->dev;
+	const struct pca995x_chipdef *chipdef;
  	struct pca995x_chip *chip;
  	struct pca995x_led *led;
-	int i, btype, reg, ret;
+	int reg, ret;
- btype = (unsigned long)device_get_match_data(&client->dev);
+	chipdef = device_get_match_data(&client->dev);
np = dev_fwnode(dev);
  	if (!np)
  		return -ENODEV;
- chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	chip = devm_kzalloc(dev, struct_size(chip, leds, chipdef->num_leds), GFP_KERNEL);
  	if (!chip)
  		return -ENOMEM;
- chip->btype = btype;
+	chip->chipdef = chipdef;
  	chip->regmap = devm_regmap_init_i2c(client, &pca995x_regmap);
  	if (IS_ERR(chip->regmap))
  		return PTR_ERR(chip->regmap);
@@ -126,41 +149,34 @@ static int pca995x_probe(struct i2c_client *client)
  	i2c_set_clientdata(client, chip);
fwnode_for_each_available_child_node(np, child) {
+		struct led_init_data init_data = {};
+
  		ret = fwnode_property_read_u32(child, "reg", &reg);
  		if (ret) {
  			fwnode_handle_put(child);
  			return ret;
  		}
- if (reg < 0 || reg >= PCA995X_MAX_OUTPUTS || led_fwnodes[reg]) {
+		if (reg < 0 || reg >= chipdef->num_leds) {
  			fwnode_handle_put(child);
  			return -EINVAL;
  		}
led = &chip->leds[reg];
-		led_fwnodes[reg] = child;
  		led->chip = chip;
  		led->led_no = reg;
  		led->ldev.brightness_set_blocking = pca995x_brightness_set;
  		led->ldev.max_brightness = 255;
-	}
-
-	for (i = 0; i < PCA995X_MAX_OUTPUTS; i++) {
-		struct led_init_data init_data = {};
-
-		if (!led_fwnodes[i])
-			continue;
-
-		init_data.fwnode = led_fwnodes[i];
+		init_data.fwnode = child;
ret = devm_led_classdev_register_ext(dev,
-						     &chip->leds[i].ldev,
+						     &led->ldev,
  						     &init_data);
  		if (ret < 0) {
  			fwnode_handle_put(child);
  			return dev_err_probe(dev, ret,
  					     "Could not register LED %s\n",
-					     chip->leds[i].ldev.name);
+					     led->ldev.name);
  		}
  	}
@@ -170,21 +186,21 @@ static int pca995x_probe(struct i2c_client *client)
  		return ret;
/* IREF Output current value for all LEDn outputs */
-	return regmap_write(chip->regmap,
-			    btype ? PCA9955B_IREFALL : PCA9952_IREFALL,
-			    PCA995X_IREFALL_HALF_CFG);
+	return regmap_write(chip->regmap, chipdef->irefall, PCA995X_IREFALL_HALF_CFG);
  }
static const struct i2c_device_id pca995x_id[] = {
-	{ "pca9952", .driver_data = (kernel_ulong_t)PCA995X_TYPE_NON_B },
-	{ "pca9955b", .driver_data = (kernel_ulong_t)PCA995X_TYPE_B },
+	{ "pca9952", .driver_data = (kernel_ulong_t)&pca995x_chipdefs[pca9952] },
+	{ "pca9955b", .driver_data = (kernel_ulong_t)&pca995x_chipdefs[pca9955b] },
+	{ "pca9956b", .driver_data = (kernel_ulong_t)&pca995x_chipdefs[pca9956b] },

... pass pointer to each (separate) chip type structure here ...

  	{}
  };
  MODULE_DEVICE_TABLE(i2c, pca995x_id);
static const struct of_device_id pca995x_of_match[] = {
-	{ .compatible = "nxp,pca9952",  .data = (void *)PCA995X_TYPE_NON_B },
-	{ .compatible = "nxp,pca9955b", .data = (void *)PCA995X_TYPE_B },
+	{ .compatible = "nxp,pca9952", .data = &pca995x_chipdefs[pca9952] },
+	{ .compatible = "nxp,pca9955b", . data = &pca995x_chipdefs[pca9955b] },
+	{ .compatible = "nxp,pca9956b", .data = &pca995x_chipdefs[pca9956b] },

... and here.

In pca995x_probe() , cache pointer to the whole struct pca995x_chipdef and use its members all over the driver. That's how you can get rid of the enum .




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux