On 09/07/2024 18:36, Joshua Felmeden wrote: > Add device tree documentation for ENS21x family of temperature and > humidity sensors > > Signed-off-by: Joshua Felmeden <jfelmeden@xxxxxxxxxxxxxxxxxxxx> I believe that's either RESEND or v2, so you are supposed to mark it in patch prefix accordingly. If it is v2, then provide also changelog under --- or in cover letter. > --- > .../bindings/iio/humidity/sciosense,ens21x.yaml | 50 ++++++++++++++++++++++ > 1 file changed, 50 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/humidity/sciosense,ens21x.yaml b/Documentation/devicetree/bindings/iio/humidity/sciosense,ens21x.yaml > new file mode 100644 > index 000000000000..3140349a58b8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/humidity/sciosense,ens21x.yaml > @@ -0,0 +1,50 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/humidity/sciosense,ens21x.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ScioSense ENS21x temperature and humidity sensor > + > +maintainers: > + - Joshua Felmeden <jfelmeden@xxxxxxxxxxxxxxxxxxxx> > + > +description: | > + Temperature and Humidity sensor. > + > + Datasheet: > + https://www.sciosense.com/wp-content/uploads/2024/04/ENS21x-Datasheet.pdf > + https://www.sciosense.com/wp-content/uploads/2023/12/ENS210-Datasheet.pdf > + > +properties: > + compatible: > + enum: > + - sciosense,ens210 > + - sciosense,ens210a > + - sciosense,ens211 > + - sciosense,ens212 > + - sciosense,ens213a > + - sciosense,ens215 Driver suggests these are compatible, so I would normally expect using one as fallback for others. > + > + reg: > + maxItems: 1 > + Missing supply. > +required: > + - compatible > + - reg > + > +unevaluatedProperties: false This must be additionalProperties instead. Best regards, Krzysztof
