Add missing UART configuration for sa8775. Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sa8775p.dtsi | 231 ++++++++++++++++++++++++++ 1 file changed, 231 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index 23f1b2e5e624..c107ee40341d 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2023, Linaro Limited + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. */ #include <dt-bindings/interconnect/qcom,icc.h> @@ -657,6 +658,21 @@ status = "disabled"; }; + uart14: serial@880000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00880000 0x0 0x4000>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + i2c15: i2c@884000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x884000 0x0 0x4000>; @@ -699,6 +715,21 @@ status = "disabled"; }; + uart15: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00884000 0x0 0x4000>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + i2c16: i2c@888000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x888000 0x0 0x4000>; @@ -741,6 +772,21 @@ status = "disabled"; }; + uart16: serial@888000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00888000 0x0 0x4000>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + i2c17: i2c@88c000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x88c000 0x0 0x4000>; @@ -840,6 +886,21 @@ status = "disabled"; }; + uart18: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00890000 0x0 0x4000>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + i2c19: i2c@894000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x894000 0x0 0x4000>; @@ -882,6 +943,21 @@ status = "disabled"; }; + uart19: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00894000 0x0 0x4000>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + i2c20: i2c@898000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x898000 0x0 0x4000>; @@ -923,6 +999,22 @@ power-domains = <&rpmhpd SA8775P_CX>; status = "disabled"; }; + + uart20: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00898000 0x0 0x4000>; + interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; qupv3_id_0: geniqup@9c0000 { @@ -979,6 +1071,21 @@ status = "disabled"; }; + uart0: serial@980000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x980000 0x0 0x4000>; + interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + i2c1: i2c@984000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x984000 0x0 0x4000>; @@ -1021,6 +1128,21 @@ status = "disabled"; }; + uart1: serial@984000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x984000 0x0 0x4000>; + interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + i2c2: i2c@988000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x988000 0x0 0x4000>; @@ -1063,6 +1185,21 @@ status = "disabled"; }; + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x988000 0x0 0x4000>; + interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + i2c3: i2c@98c000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x98c000 0x0 0x4000>; @@ -1105,6 +1242,21 @@ status = "disabled"; }; + uart3: serial@98c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x98c000 0x0 0x4000>; + interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + i2c4: i2c@990000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x990000 0x0 0x4000>; @@ -1147,6 +1299,21 @@ status = "disabled"; }; + uart4: serial@990000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x990000 0x0 0x4000>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + i2c5: i2c@994000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x994000 0x0 0x4000>; @@ -1259,6 +1426,22 @@ status = "disabled"; }; + uart7: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a80000 0x0 0x4000>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + interconnect-names = "qup-core", "qup-config"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + power-domains = <&rpmhpd SA8775P_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + i2c8: i2c@a84000 { compatible = "qcom,geni-i2c"; reg = <0x0 0xa84000 0x0 0x4000>; @@ -1301,6 +1484,22 @@ status = "disabled"; }; + uart8: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a84000 0x0 0x4000>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + interconnect-names = "qup-core", "qup-config"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + power-domains = <&rpmhpd SA8775P_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + i2c9: i2c@a88000 { compatible = "qcom,geni-i2c"; reg = <0x0 0xa88000 0x0 0x4000>; @@ -1458,6 +1657,22 @@ status = "disabled"; }; + uart11: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a90000 0x0 0x4000>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interconnect-names = "qup-core", "qup-config"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + power-domains = <&rpmhpd SA8775P_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + i2c12: i2c@a94000 { compatible = "qcom,geni-i2c"; reg = <0x0 0xa94000 0x0 0x4000>; @@ -1590,6 +1805,22 @@ power-domains = <&rpmhpd SA8775P_CX>; status = "disabled"; }; + + uart21: serial@b80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00b80000 0x0 0x4000>; + interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; + interconnect-names = "qup-core", "qup-config"; + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>; + power-domains = <&rpmhpd SA8775P_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; }; rng: rng@10d2000 { -- 2.17.1