Add gpio-keys for exposing the LID switch state, similar to sc8280xp-lenovo-thinkpad-x13s.dts. Only the GPIO number is different. Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index 6152bcd0bc1f..889253ff5408 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -6,6 +6,8 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "x1e80100.dtsi" @@ -49,6 +51,21 @@ chosen { stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + pmic-glink { compatible = "qcom,x1e80100-pmic-glink", "qcom,sm8550-pmic-glink", @@ -918,6 +935,12 @@ edp_reg_en: edp-reg-en-state { bias-disable; }; + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + bias-disable; + }; + kybd_default: kybd-default-state { pins = "gpio67"; function = "gpio"; --- base-commit: 6fd4da15c334831a865d4700ceb3ff5a917163e3 change-id: 20240710-x1e80100-crd-lid-4393fdebaf92 Best regards, -- Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>