Re: [PATCH v2 2/2] PCI: qcom-ep: Add HDMA support for QCS9100 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 7/10/2024 12:26 AM, Bjorn Helgaas wrote:
On Tue, Jul 09, 2024 at 10:53:44PM +0800, Tengfei Fan wrote:
QCS9100 SoC supports the new Hyper DMA (HDMA) DMA Engine inside the DWC IP,
so add support for it by passing the mapping format and the number of
read/write channels count.

The PCIe EP controller used on this SoC is of version 1.34.0, so a separate
config struct is introduced for the sake of enabling HDMA conditionally.

This patch doesn't add a new config struct.

Thank you for pointing out this. I will remove this commit message in the next version patch series.


It should be noted that for the eDMA support (predecessor of HDMA), there
are no mapping format and channels count specified. That is because eDMA
supports auto detection of both parameters, whereas HDMA doesn't.

QCS9100 is drived from SA8775p. Currently, both the QCS9100 and SA8775p
platform use non-SCMI resource. In the future, the SA8775p platform will
move to use SCMI resources and it will have new sa8775p-related device
tree. Consequently, introduce "qcom,qcs9100-pcie-ep" to the PCIe device
match table.

This series doesn't add the new SCMI stuff you mention.  It sounds
like this should be deferred and added when you actually move to using
SCMI resources.

This patch shouldn't be deferred.

This patch is used to support QSC9100. QCS9100 uses non-SCMI resources, so there is nothing related to SCMI in this patch.

Only SA8775p will move to use SCMI resources in the future.



Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
---
  drivers/pci/controller/dwc/pcie-qcom-ep.c | 1 +
  1 file changed, 1 insertion(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 236229f66c80..e2775f4ca7ee 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -904,6 +904,7 @@ static const struct qcom_pcie_ep_cfg cfg_1_34_0 = {
  };
static const struct of_device_id qcom_pcie_ep_match[] = {
+	{ .compatible = "qcom,qcs9100-pcie-ep", .data = &cfg_1_34_0},
  	{ .compatible = "qcom,sa8775p-pcie-ep", .data = &cfg_1_34_0},
  	{ .compatible = "qcom,sdx55-pcie-ep", },
  	{ .compatible = "qcom,sm8450-pcie-ep", },

--
2.25.1


--
Thx and BRs,
Tengfei Fan




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux