Convert the Qualcomm APQ8084 TLMM block bindings from text to yaml dt schema format. Signed-off-by: Rayyan Ansari <rayyan.ansari@xxxxxxxxxx> --- .../bindings/pinctrl/qcom,apq8084-pinctrl.txt | 188 ------------------ .../pinctrl/qcom,apq8084-pinctrl.yaml | 129 ++++++++++++ 2 files changed, 129 insertions(+), 188 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt deleted file mode 100644 index c9782397ff14..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt +++ /dev/null @@ -1,188 +0,0 @@ -Qualcomm APQ8084 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8960 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,apq8084-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio146, - sdc1_clk, - sdc1_cmd, - sdc1_data - sdc2_clk, - sdc2_cmd, - sdc2_data - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3, - blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, - blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, - blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, - blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10, - blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3, - blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7, blsp_uart8, - blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12, - blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, - blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10, - blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2, - cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1, - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, - edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt, gcc_vtt,i - gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio, - hdmi_cec, hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic, - ldo_en, ldo_update, mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst, - pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s, - qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n, - sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus, - spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s, tsif1, - tsif2, uim, uim_batt_alarm - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@fd510000 { - compatible = "qcom,apq8084-pinctrl"; - reg = <0xfd510000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 147>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 208 0>; - - uart2: uart2-default { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - }; - - tx { - pins = "gpio4"; - drive-strength = <4>; - bias-disable; - }; - - rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.yaml new file mode 100644 index 000000000000..38877d8b97ff --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,apq8084-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. APQ8084 TLMM block + +maintainers: + - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> + +description: | + Top Level Mode Multiplexer pin controller in Qualcomm APQ8084 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,apq8084-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-apq8084-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-apq8084-tlmm-state" + additionalProperties: false + +$defs: + qcom-apq8084-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-6])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3, + blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, + blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, + blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, + blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, + blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6, + blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10, + blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, + blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2, + blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, + blsp_uart7, blsp_uart8, blsp_uart9, blsp_uart10, + blsp_uart11, blsp_uart12, blsp_uim1, blsp_uim2, + blsp_uim3, blsp_uim4, blsp_uim5, blsp_uim6, blsp_uim7, + blsp_uim8, blsp_uim9, blsp_uim10, blsp_uim11, + blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3, + cci_async, cci_async_in0, cci_i2c0, cci_i2c1, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, + cci_timer4, edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, + gcc_obt, gcc_vtt, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, + gp0_clk, gp1_clk, gpio, hdmi_cec, hdmi_ddc, hdmi_dtest, + hdmi_hpd, hdmi_rcv, hsic, ldo_en, ldo_update, + mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst, pci_e1, + pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s, + qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n, + sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus, + spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s, + tsif1, tsif2, uim, uim_batt_alarm ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@fd510000 { + compatible = "qcom,apq8084-pinctrl"; + reg = <0xfd510000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 147>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + uart-state { + rx-pins { + pins = "gpio5"; + function = "blsp_uart2"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio4"; + function = "blsp_uart2"; + bias-disable; + }; + }; + }; -- 2.45.2