On Fri, Mar 06, 2015 at 09:16:44AM -0600, Rob Herring wrote:
> On Fri, Mar 6, 2015 at 9:09 AM, Matt Porter <mporter@xxxxxxxxxxxx> wrote:
> > The imx-pwm binding contains language indicating compatible
> > strings to be used that is not valid for all supported parts
> > e.g. Should be "fsl,<soc>-pwm". Fix this by enumerating the
> > valid compatible strings that represent the two versions of
> > this peripheral in use.
> >
> > The binding is also missing the clocks/clock-names properties
> > so document these,the two required ipg and per clocks, and add
> > add these properties to the example.
> >
> > Signed-off-by: Matt Porter <mporter@xxxxxxxxxxxx>
> > ---
> > Documentation/devicetree/bindings/pwm/imx-pwm.txt | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt
> > index b50d7a6d..30d2b82 100644
> > --- a/Documentation/devicetree/bindings/pwm/imx-pwm.txt
> > +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.txt
> > @@ -1,10 +1,16 @@
> > Freescale i.MX PWM controller
> >
> > Required properties:
> > -- compatible: should be "fsl,<soc>-pwm"
> > +- compatible :
> > + - "fsl,imx1-pwm" for PWM compatible with the one integrated on i.MX1
> > + - "fsl,imx27-pwm" for PWM compatible with the one integrated on i.MX27
>
> This should be one of these and a more specific value as the example
> below shows.
Ok, yes, I wasn't sure if that was expected to be explicit in the bindings
or not as others don't seem to represent that properly. What about this?
- compatible: should be "fsl,<soc>-pwm" and one of the following
compatible strings:
"fsl,imx1-pwm" for an iMX1 compatible PWM
"fsl,imx27-pwm" for an iMX27 compatible PWM
> > - reg: physical base address and length of the controller's registers
> > - #pwm-cells: should be 2. See pwm.txt in this directory for a description of
> > the cells format.
> > +- clocks : Clock specifiers for both ipg and per clocks.
> > +- clock-names : Clock names should include both "ipg" and "per"
> > +See the clock consumer binding,
> > + Documentation/devicetree/bindings/clock/clock-bindings.txt
> > - interrupts: The interrupt for the pwm controller
> >
> > Example:
> > @@ -13,5 +19,8 @@ pwm1: pwm@53fb4000 {
> > #pwm-cells = <2>;
> > compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
> > reg = <0x53fb4000 0x4000>;
> > + clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
> > + <&clks IMX5_CLK_PWM1_HF_GATE>;
> > + clock-names = "ipg", "per";
> > interrupts = <61>;
> > };
> > --
> > 1.8.4
> >
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
