On Thu, Jul 04, 2024 at 03:36:40PM +0200, Julien Stephan wrote: > From: Louis Kuo <louis.kuo@xxxxxxxxxxxx> > > This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in > some Mediatek SoC, such as the mt8365 > > Signed-off-by: Louis Kuo <louis.kuo@xxxxxxxxxxxx> > Signed-off-by: Phi-Bang Nguyen <pnguyen@xxxxxxxxxxxx> > Link: https://lore.kernel.org/r/20230807094940.329165-2-jstephan@xxxxxxxxxxxx > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Signed-off-by: Julien Stephan <jstephan@xxxxxxxxxxxx> I'm really confused by the link tag here. At first glance this looked like you were sending out something that had been applied by Laurent, given the Link, Rb and SoB from him. Why does he have a SoB on this patch? What did Phi-Bang Nguyen do with this patch, and should they have a Co-developed-by tag? > --- > .../bindings/media/mediatek,mt8365-seninf.yaml | 275 +++++++++++++++++++++ > MAINTAINERS | 7 + > 2 files changed, 282 insertions(+) > > diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml > new file mode 100644 > index 000000000000..aeabea9f956a > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml > @@ -0,0 +1,275 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2023 MediaTek, BayLibre > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/mediatek,mt8365-seninf.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek Sensor Interface 3.0 > + > +maintainers: > + - Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > + - Julien Stephan <jstephan@xxxxxxxxxxxx> > + - Andy Hsieh <andy.hsieh@xxxxxxxxxxxx> > + > +description: > + The ISP3.0 SENINF is the CSI-2 and parallel camera sensor interface found in > + multiple MediaTek SoCs. It can support up to three physical CSI-2 input ports, > + configured in DPHY (2 or 4 data lanes) or CPHY depending on the SoC. > + On the output side, SENINF can be connected either to CAMSV instance or > + to the internal ISP. CAMSV is used to bypass the internal ISP processing > + in order to connect either an external ISP, or a sensor (RAW, YUV). > + > +properties: > + compatible: > + const: mediatek,mt8365-seninf > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > + clocks: > + items: > + - description: Seninf camsys clock > + - description: Seninf top mux clock > + > + clock-names: > + items: > + - const: camsys > + - const: top_mux > + > + phys: true > + > + phy-names: true > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: CSI0 or CSI0A port > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: CSI1 port > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + port@2: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: CSI2 port > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + port@3: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: CSI0B port > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + data-lanes: > + minItems: 1 > + maxItems: 2 > + > + port@4: > + $ref: /schemas/graph.yaml#/properties/port > + description: connection point for cam0 > + > + port@5: > + $ref: /schemas/graph.yaml#/properties/port > + description: connection point for cam1 > + > + port@6: > + $ref: /schemas/graph.yaml#/properties/port > + description: connection point for camsv0 > + > + port@7: > + $ref: /schemas/graph.yaml#/properties/port > + description: connection point for camsv1 > + > + port@8: > + $ref: /schemas/graph.yaml#/properties/port > + description: connection point for camsv2 > + > + port@9: > + $ref: /schemas/graph.yaml#/properties/port > + description: connection point for camsv3 > + > + required: > + - port@0 > + - port@1 > + - port@2 > + - port@3 > + - port@4 > + - port@5 > + - port@6 > + - port@7 > + - port@8 > + - port@9 > + > +required: > + - compatible > + - interrupts > + - clocks > + - clock-names > + - power-domains > + - ports > + > +additionalProperties: false > + > +if: > + properties: > + compatible: > + contains: > + const: mediatek,mt8365-seninf The binding supports only a single compatible, why is this complexity required? I don't see other devices being added in this series. Cheers, Conor. > +then: > + properties: > + phys: > + minItems: 2 > + maxItems: 2 > + description: > + phandle to the PHYs connected to CSI0/A, CSI1, CSI0B > + > + phy-names: > + description: > + list of PHYs names > + minItems: 2 > + maxItems: 2 > + items: > + type: string > + enum: > + - csi0 > + - csi1 > + - csi0b > + uniqueItems: true
Attachment:
signature.asc
Description: PGP signature
