USB vbus 5V is from PMIC SWBST, so set swbst_reg as vbus's
parent reg, it fixed a bug that the voltage of vbus is incorrect
due to swbst_reg is disabled after boots up.
Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index f1cd214..a626e6d 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -35,6 +35,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 0>;
enable-active-high;
+ vin-supply = <&swbst_reg>;
};
reg_usb_h1_vbus: regulator@1 {
@@ -45,6 +46,7 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 29 0>;
enable-active-high;
+ vin-supply = <&swbst_reg>;
};
reg_audio: regulator@2 {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
