On Tue, 02 Jul 2024 16:59:08 +0200, Petar Stoykov wrote: > Sensirion SDP500 is a digital differential pressure sensor. It provides > a digital I2C output. Add devicetree bindings requiring the compatible > string and I2C slave address (reg). > > Signed-off-by: Petar Stoykov <pd.pstoykov@xxxxxxxxx> > --- > .../bindings/iio/pressure/sensirion,sdp500.yaml | 41 ++++++++++++++++++++++ > 1 file changed, 41 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename $id: http://devicetree.org/schemas/iio/pressure/sdp500.yaml file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.example.dtb: pressure@40: 'vdd-supply' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/pressure/sdp500.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240702-mainline_sdp500-v3-1-0902047b3eee@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
