This patch series adds the support for Broadcom iProc PCIe controller pcie-iproc.c servers as the common core driver, and front-end bus interface needs to be added to support different bus interfaces pcie-iproc-pltfm.c contains the support for the platform bus interface Changes from v2: - Major rework of the PCIe driver to factor out common generic code from front-end bus interface. Support for generic platform bus interface is also added - Adapt to several new PCI APIs that have been introduced lately Changes from v1: - Add standard PCI interrupt DT properties "#interrupt-cells", "interrupt-map-mask" and "interrupt-map" so legacy INTx interrupts can be supported by using standard PCI OF IRQ parsing function - Get rid of custom IRQ mapping function in the driver. Use of_irq_parse_and_map_pci instead Ray Jui (3): pci: iProc: define iProc PCIe platform bus binding pci: iproc: Add Broadcom iProc PCIe support ARM: dts: enable PCIe support for Cygnus .../devicetree/bindings/pci/brcm,iproc-pcie.txt | 63 ++++ arch/arm/boot/dts/bcm-cygnus.dtsi | 42 +++ arch/arm/boot/dts/bcm958300k.dts | 8 + drivers/pci/host/Kconfig | 17 + drivers/pci/host/Makefile | 2 + drivers/pci/host/pcie-iproc-pltfm.c | 101 ++++++ drivers/pci/host/pcie-iproc.c | 337 ++++++++++++++++++++ drivers/pci/host/pcie-iproc.h | 39 +++ 8 files changed, 609 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt create mode 100644 drivers/pci/host/pcie-iproc-pltfm.c create mode 100644 drivers/pci/host/pcie-iproc.c create mode 100644 drivers/pci/host/pcie-iproc.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
