[PATCH 1/7] ARM: dts: marvell: kirkwood: align GPIO keys node name with bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Bindings expect the GPIO key node names to follow certain pattern, see
dtbs_check warnings:

  kirkwood-laplug.dtb: gpio_keys: 'power' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)...

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts | 4 ++--
 arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts           | 8 ++++----
 arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts          | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-dir665.dts            | 4 ++--
 arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi            | 6 +++---
 arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts            | 4 ++--
 arch/arm/boot/dts/marvell/kirkwood-iconnect.dts          | 4 ++--
 arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts    | 6 +++---
 arch/arm/boot/dts/marvell/kirkwood-l-50.dts              | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-laplug.dts            | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts     | 4 ++--
 arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi             | 6 +++---
 arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts   | 4 ++--
 arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi          | 6 +++---
 arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi       | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts           | 6 +++---
 arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi    | 6 +++---
 arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts     | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-t5325.dts             | 2 +-
 arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts        | 4 ++--
 arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts        | 4 ++--
 arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi            | 4 ++--
 23 files changed, 47 insertions(+), 47 deletions(-)

diff --git a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
index 07fbfca444d5..f34c3897ff48 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
@@ -35,13 +35,13 @@ gpio_poweroff {
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		button {
+		button-power {
 			label = "Power";
 			linux,code = <KEY_SLEEP>;
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
index f59ff7578dfc..7e3ee64d4bdf 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
@@ -29,25 +29,25 @@ keys {
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 		};
 
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb1 {
+		button-usb1 {
 			label = "USB1 Button";
 			linux,code = <BTN_0>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		button-usb2 {
 			label = "USB2 Button";
 			linux,code = <BTN_1>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
index 448b0cd23b5f..2582b84d8415 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
@@ -61,7 +61,7 @@ gpio_keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		power {
+		key-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
index 0c0851cd9bec..e8eff0ba1c99 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
@@ -179,12 +179,12 @@ gpio-keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		reset {
+		button-reset {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
index 0738eb679fcd..baea14c68520 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
@@ -14,17 +14,17 @@ gpio_keys {
 			     &pmx_button_reset>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 		};
-		eject {
+		button-eject {
 			label = "USB unmount button";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
index 962a910a6f5c..d76dbbce16f1 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
@@ -63,12 +63,12 @@ gpio_keys {
 		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
index aed20185fd7a..ea98ff13700e 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
@@ -127,13 +127,13 @@ gpio_keys {
 		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
 		pinctrl-names = "default";
 
-		otb {
+		button-otb {
 			label = "OTB Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
index 2338f495d517..fa7ace071de8 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
@@ -154,17 +154,17 @@ gpio-keys {
 		pinctrl-names = "default";
 
 
-		Power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 		};
-		Reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 		};
-		OTB {
+		button-otb {
 			label = "OTB Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
index c841eb8e7fb1..094854743dde 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -193,7 +193,7 @@ express_card_pwr {
 	keys {
 		compatible = "gpio-keys";
 
-		factory_defaults {
+		button-factory-defaults {
 			label = "factory_defaults";
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-laplug.dts b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
index 8c2b540eaf4f..8296486a5931 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
@@ -51,7 +51,7 @@ pmx_usb_power_enable: pmx-usb-power-enable {
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		power {
+		button-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
index 27fd6e2337d5..3f97240fda74 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
@@ -38,13 +38,13 @@ gpio_keys {
 		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
 		pinctrl-names = "default";
 
-		wps {
+		button-wps {
 			label = "WPS Button";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
index f80af24b9e90..a86dbc490600 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
@@ -113,18 +113,18 @@ gpio_keys {
 			     &pmx_power_auto_switch>;
 		pinctrl-names = "default";
 
-		option {
+		button-option {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
-		reserved {
+		button-reserved {
 			label = "Power-on Switch";
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
-		power {
+		button-power {
 			label = "Power-auto Switch";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
index 5a77286136c7..0d5d85c873b5 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
@@ -96,12 +96,12 @@ gpio_keys {
 		pinctrl-0 = <&pmx_keys>;
 		pinctrl-names = "default";
 
-		restart {
+		button-restart {
 			label = "SWR Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		wps {
+		button-wps {
 			label = "WPS Button";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
index b5737026e244..d0f85893aeca 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
@@ -60,19 +60,19 @@ gpio-keys {
 		 * esc and power represent a three position rocker
 		 * switch. Thus the conventional KEY_POWER does not fit
 		 */
-		exc {
+		button-exc {
 			label = "Back power switch (on|auto)";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 		};
-		power {
+		button-power {
 			label = "Back power switch (auto|off)";
 			linux,code = <KEY_1>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		option {
+		button-option {
 			label = "Function button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
index 51530ea86622..6cc068a05673 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
@@ -58,7 +58,7 @@ gpio_keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
index 49da633a1bc0..767f34ab434e 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
@@ -40,19 +40,19 @@ keys {
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
 		};
 
-		copy {
+		button-copy {
 			label = "Copy Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
index ea3d36512e9f..bdce8a86ce51 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
@@ -68,17 +68,17 @@ gpio_keys {
 		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
-		copy {
+		button-copy {
 			label = "Copy Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
index 8ea430168ea5..ef6d6d7a4008 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
@@ -118,7 +118,7 @@ gpio_keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Init Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
index 5aa4669ae254..601760041c99 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
@@ -34,7 +34,7 @@ gpio_keys {
 		pinctrl-0 = <&pmx_button_eject>;
 		pinctrl-names = "default";
 
-		eject {
+		button-eject {
 			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_EJECTCD>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-t5325.dts b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
index ad093324e075..6703e412c8e2 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
@@ -161,7 +161,7 @@ gpio_keys {
 		pinctrl-0 = <&pmx_button_power>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
index 30892c19aceb..859521b5b84e 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
@@ -40,12 +40,12 @@ gpio_keys {
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
index aba1205981f1..3b0a4ed588e8 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
@@ -40,12 +40,12 @@ gpio_keys {
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
index 717236853e45..126db753c8fe 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
@@ -41,12 +41,12 @@ gpio_keys {
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;

-- 
2.43.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux